HomeHOW TO DO AN ADVANCED SEARCH.
Mon Jul 08, 2013 3:56 pm by Admin
For the benefit of 944Hybrids users there are two search functions available for you to use.
The purpose of this sticky is to explain the "Advanced Search" function because it is much more powerful and is the best choice when researching information.
When you log on to the site a list of options is shown in a line at the top of the page. One option is labelled "Search", use this option (NOT the search box lower down on the right).
After you click on the upper search option, a drop down box appears. At the bottom of this box is a radio button marked "Advanced …
Comments: 0
Latest topics
Log in
Update from Florida
2 posters
Page 1 of 1
Update from Florida
fliermike45 Fri Jun 25, 2010 8:04 pm
[You must be registered and logged in to see this image.]
I'm almost ready to start the LS1 swap, I have all the parts in house except Greg is providing a modified set back plate and mount for the pax side. (Fouls the Compressor).
My Driver's side header is at the welders for modification to clear the steering.
Picture shows my "new" 17" cup 1 wheels, fronts are replica 7.5 J and rears are Porsche 9 J.
Tires are 225-45-17 fronts and 255-40-17 all Falkens. Does not seem to be any problems with body fouling.
I have a pair of the 7J's and one 9J for sale along with the original phone dials with nearly new tires.
The first mod I did was to run a 3" exhaust system ready for when the LS1 goes in.
I was fortunate to find a Turbo transmission with LSD and also have ordered a new set of Torque Tube bearings from Constantine. Original 79 paint.
I'm almost ready to start the LS1 swap, I have all the parts in house except Greg is providing a modified set back plate and mount for the pax side. (Fouls the Compressor).
My Driver's side header is at the welders for modification to clear the steering.
Picture shows my "new" 17" cup 1 wheels, fronts are replica 7.5 J and rears are Porsche 9 J.
Tires are 225-45-17 fronts and 255-40-17 all Falkens. Does not seem to be any problems with body fouling.
I have a pair of the 7J's and one 9J for sale along with the original phone dials with nearly new tires.
The first mod I did was to run a 3" exhaust system ready for when the LS1 goes in.
I was fortunate to find a Turbo transmission with LSD and also have ordered a new set of Torque Tube bearings from Constantine. Original 79 paint.
fliermike45- Posts : 778
Join date : 2009-09-19
Porch- Posts : 851
Join date : 2009-09-02
Age : 42
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
» Rear coilover suspension setup
» Best engine uprights/plates
» LEAKING TPC HYDROBOOST
» HYDRAULIC THROWOUT/RELEASE BEARING NOT ENGAGING FULLY
» Fesler Saratoga Top
» Ray's 1987 944 LS1 Build & Swap
» LS 982 5speed project here
» LT1 Spark Plug make and model
» 928 5-speed kit