HomeHOW TO DO AN ADVANCED SEARCH.
Mon Jul 08, 2013 3:56 pm by Admin
For the benefit of 944Hybrids users there are two search functions available for you to use.
The purpose of this sticky is to explain the "Advanced Search" function because it is much more powerful and is the best choice when researching information.
When you log on to the site a list of options is shown in a line at the top of the page. One option is labelled "Search", use this option (NOT the search box lower down on the right).
After you click on the upper search option, a drop down box appears. At the bottom of this box is a radio button marked "Advanced …
Comments: 0
Latest topics
Log in
LS2 to make 400rwhp?
3 posters
Page 1 of 1
LS2 to make 400rwhp?
remington7 Tue Apr 19, 2011 4:51 pm
Hi I am looking to do an LS2 conversion. I want to be making over 400rwhp what are the mods needed to achieve this? I plan on using a single 3.5inch or 4inch exhaust and TPC long tube headers.
remington7- Posts : 19
Join date : 2011-01-22
Re: LS2 to make 400rwhp?
Dawgz83948 Tue Apr 19, 2011 5:00 pm
Headers, throttlebody, tune and a free flowing intake will probably get you there.remington7 wrote:Hi I am looking to do an LS2 conversion. I want to be making over 400rwhp what are the mods needed to achieve this? I plan on using a single 3.5inch or 4inch exhaust and TPC long tube headers.
Dawgz83948- Posts : 603
Join date : 2009-06-08
Location : Ca.
Re: LS2 to make 400rwhp?
docwyte Wed Apr 20, 2011 8:44 am
I'm making almost that with my LS1. Shorty headers, intake and cam. The cam selection is the key. Get the wrong one and you can be down 40rwhp. Been there, done that!
docwyte- Posts : 1393
Join date : 2010-07-18
Re: LS2 to make 400rwhp?
Dawgz83948 Wed Apr 20, 2011 9:11 am
docwyte wrote:I'm making almost that with my LS1. Shorty headers, intake and cam. The cam selection is the key. Get the wrong one and you can be down 40rwhp. Been there, done that!
Don't forget the LS2 is rated at 400hp from the factory (not rwhp of course) and the LS1 is rated lower.
Dawgz83948- Posts : 603
Join date : 2009-06-08
Location : Ca.
Re: LS2 to make 400rwhp?
docwyte Wed Apr 20, 2011 9:48 am
So an LS2 is around 350rwhp then?
If so, still going to need a cam to get over 400rwhp...
If so, still going to need a cam to get over 400rwhp...
docwyte- Posts : 1393
Join date : 2010-07-18
Re: LS2 to make 400rwhp?
Dawgz83948 Wed Apr 20, 2011 11:25 am
docwyte wrote:So an LS2 is around 350rwhp then?
If so, still going to need a cam to get over 400rwhp...
[You must be registered and logged in to see this link.]
No cam can get you to within 8hp of 400. anything more will require a cam.
Dawgz83948- Posts : 603
Join date : 2009-06-08
Location : Ca.
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
» Best engine uprights/plates
» LEAKING TPC HYDROBOOST
» HYDRAULIC THROWOUT/RELEASE BEARING NOT ENGAGING FULLY
» Fesler Saratoga Top
» Ray's 1987 944 LS1 Build & Swap
» LS 982 5speed project here
» LT1 Spark Plug make and model
» 928 5-speed kit
» Slave Cylinder Spacing from Clutch Fingers