HOW TO DO AN ADVANCED SEARCH.

Mon Jul 08, 2013 3:56 pm by Admin


For the benefit of 944Hybrids users there are two search functions available for you to use.
The purpose of this sticky is to explain the "Advanced Search" function because it is much more powerful and is the best choice when researching information.

When you log on to the site a list of options is shown in a line at the top of the page. One option is labelled "Search", use this option (NOT the search box lower down on the right).

After you click on the upper search option, a drop down box appears. At the bottom of this box is a radio button marked "Advanced …

Comments: 0

Latest topics
» Boxster Rear Calipers
Today at 7:48 am by superman22x

» 944 with LS3 bucking or jerking while cruising or low speed problem
Yesterday at 1:14 am by sharkey

» A/C parts used for the swap !
Sat Jul 14, 2018 9:31 am by Rothaus

» Noisy VSS and stalling???
Sat Jul 14, 2018 8:55 am by murrayg

» Modifying Hooker 2312 headers to fit LSx in 944 engine bay
Fri Jul 13, 2018 9:01 pm by knucklehead12

» Headers, headers, HEADERS!
Fri Jul 13, 2018 10:17 am by Hotrodz of Dallas

» Drive shaft too short to reach pilot bearning
Thu Jul 12, 2018 4:48 am by spence

» Electric brakes
Wed Jul 11, 2018 10:11 pm by superman22x

» LS3 conversion
Wed Jul 11, 2018 11:06 am by tannerhwilson

» 944 NA suspension suggestions
Sun Jul 08, 2018 6:34 pm by eohrnberger

July 2018
MonTueWedThuFriSatSun
      1
2345678
9101112131415
16171819202122
23242526272829
3031     

Calendar Calendar

Log in

I forgot my password


LS2 to make 400rwhp?

Go down

LS2 to make 400rwhp?

Post  remington7 on Tue Apr 19, 2011 4:51 pm

Hi I am looking to do an LS2 conversion. I want to be making over 400rwhp what are the mods needed to achieve this? I plan on using a single 3.5inch or 4inch exhaust and TPC long tube headers.

remington7

Posts : 19
Join date : 2011-01-22

Back to top Go down

Re: LS2 to make 400rwhp?

Post  Dawgz83948 on Tue Apr 19, 2011 5:00 pm

remington7 wrote:Hi I am looking to do an LS2 conversion. I want to be making over 400rwhp what are the mods needed to achieve this? I plan on using a single 3.5inch or 4inch exhaust and TPC long tube headers.
Headers, throttlebody, tune and a free flowing intake will probably get you there.
avatar
Dawgz83948

Posts : 603
Join date : 2009-06-08
Location : Ca.

Back to top Go down

Re: LS2 to make 400rwhp?

Post  docwyte on Wed Apr 20, 2011 8:44 am

I'm making almost that with my LS1. Shorty headers, intake and cam. The cam selection is the key. Get the wrong one and you can be down 40rwhp. Been there, done that!

docwyte

Posts : 1380
Join date : 2010-07-18

Back to top Go down

Re: LS2 to make 400rwhp?

Post  Dawgz83948 on Wed Apr 20, 2011 9:11 am

docwyte wrote:I'm making almost that with my LS1. Shorty headers, intake and cam. The cam selection is the key. Get the wrong one and you can be down 40rwhp. Been there, done that!

Don't forget the LS2 is rated at 400hp from the factory (not rwhp of course) and the LS1 is rated lower.
avatar
Dawgz83948

Posts : 603
Join date : 2009-06-08
Location : Ca.

Back to top Go down

Re: LS2 to make 400rwhp?

Post  docwyte on Wed Apr 20, 2011 9:48 am

So an LS2 is around 350rwhp then?

If so, still going to need a cam to get over 400rwhp...

docwyte

Posts : 1380
Join date : 2010-07-18

Back to top Go down

Re: LS2 to make 400rwhp?

Post  Dawgz83948 on Wed Apr 20, 2011 11:25 am

docwyte wrote:So an LS2 is around 350rwhp then?

If so, still going to need a cam to get over 400rwhp...

[You must be registered and logged in to see this link.]

No cam can get you to within 8hp of 400. anything more will require a cam.
avatar
Dawgz83948

Posts : 603
Join date : 2009-06-08
Location : Ca.

Back to top Go down

Re: LS2 to make 400rwhp?

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum