Wilwood 330mm Big Brake kit for NA cars

The Ebay rotors are good to go. I've still yet to burn up the R1 concepts rotors I got and the Advance Rotors brand are O.K. as well....

The only thing you need to do is get 2ea 1/8-27 NPT to AN adapters if you have AN braided lines. My car already had them and was a simple switch of caliper end fittings. I bought another large stick of billet and will be churning out centering rings for some 928 modders and a couple GT3 racers. They will fit the 355mm Cayenne rotors as well

Hey Spence, those look great. How much clearance side and top and what is the offset? I'm sure the 928S guys will be interested. Thanks

I've got two sets of these adapters/centering rings left. It may be Jan. before I produce any more of these...

$209 Shipped US-48 Only.... Just PM

Got a reply back from Australia on another wheel combo......

17 inch sports classic wheels,-7 inch 55 offset, Wilwoods fit A1 (wilwood logo removed)
3mm caliper to rim clearance at the "X"

http://forums.rennlist.com/rennforums/attachments/928-forum/608225d1329351093-wilwood-calipers-cayenne-330mm-rotor-swap-porsche-brakes-078.jpg

These will not work on a 1986 N/A correct?

Not on an 86 NA unless you have a custom hub.

Bordin, Now that I think about it, The Wilwood Dynapro will fit an 86 951 300mm rotor on the 86 NA spindles/Hubs and I will be mocking those up soon.

Awesome, I've been wanting to do a brake conversion since I bought the car but wanted to keep early offset so I can run my 16" Fuchs.

Still doing wilwood kits?

Anyone know how I can get my hands on a set of these adapters? Or the prints?
I'm also interested in the ls430 swap, and the adapters. Or prints.

I have to say, I've use xcshop's RX7 swap and it works great. Had the adapters milled locally from posted prints.
THANKS XCSHOP!!!

I've yet to post enough to PM people , otherwise I'd PM him.

I pmed you or email me back , I have a set available.

d.jtc@hotmail.com

wrong thread

If you,did not get the 1.62 piston Superlights then you'll have issues with factory MC.

Please tell me you are still fabricating these/have a pair left! I have the 1978 Porsche 924 that was converted to 944 brakes, turbo twist 2 wheels as well. The car is in the shop at the moment and we are trying to figure out the best route and this appears to be it!

I'm sure you are familiar with the car:

Completely out of the Superlite adapters. I will debut the "Bigger Black" adapters and send you a set out with centering rings for the Cayenne 330 rotors.

Do you have any more wilwood adapters for NA cars or can you make me a set still?