HOW TO DO AN ADVANCED SEARCH.
Mon Jul 08, 2013 3:56 pm by Admin
For the benefit of 944Hybrids users there are two search functions available for you to use.
The purpose of this sticky is to explain the "Advanced Search" function because it is much more powerful and is the best choice when researching information.
When you log on to the site a list of options is shown in a line at the top of the page. One option is labelled "Search", use this option (NOT the search box lower down on the right).
After you click on the upper search option, a drop down box appears. At the bottom of this box is a radio button marked "Advanced …
Comments: 0
Latest topics
Log in
new buyer, looking for info
+2
Admin
gamman
6 posters
Page 1 of 1
new buyer, looking for info
Does the manual show a converted car's weight? I am looking at a 88 944s LT1 RH home conversion, and the owner is stating that the car is around 2700lbs with a so so diet.
Things like water resevoir for windshield is gone, as are back seats and rear wiper. Most else is there, apart from headlight motor and headlight transmission, he has a fancy magnet and "cam lock" slider holder you need to slide with your fingers to make the HL stay up. Pretty neat actually.
Weight seems a little on the optomistic side, as some places put the stock 944S around 3,000lbs (trackepedia). Pelican has 944s at 2637, heck, even uh, a manufacturer says 1280kgx2.2=2850 with a 4cyl stock. Anyone weighed theirs? Its too snowy here to drive to a truck stop. I will be corner weighing, once I buy it and get an adjustable set of suspension stuff.
Love the site, I will be having an inspection today and hopefully a new owner by Friday.
Where do I find or figure out what are the weak points of the RH conversion? I know there are things you guys don't like, i just haven't read between the lines enough (and they have been removed elsewhere) with the RH kit.
Things like water resevoir for windshield is gone, as are back seats and rear wiper. Most else is there, apart from headlight motor and headlight transmission, he has a fancy magnet and "cam lock" slider holder you need to slide with your fingers to make the HL stay up. Pretty neat actually.
Weight seems a little on the optomistic side, as some places put the stock 944S around 3,000lbs (trackepedia). Pelican has 944s at 2637, heck, even uh, a manufacturer says 1280kgx2.2=2850 with a 4cyl stock. Anyone weighed theirs? Its too snowy here to drive to a truck stop. I will be corner weighing, once I buy it and get an adjustable set of suspension stuff.
Love the site, I will be having an inspection today and hopefully a new owner by Friday.
Where do I find or figure out what are the weak points of the RH conversion? I know there are things you guys don't like, i just haven't read between the lines enough (and they have been removed elsewhere) with the RH kit.
gamman- Posts : 112
Join date : 2010-01-12
Location : Canada
Re: new buyer, looking for info
COST AND CUSTOMER SERVICE, THAT IS WHAT STARTED THIS SITE AND EVERYONE'S DRIVE TO DO IT OURSELVES.
Re: new buyer, looking for info
2700 is not out of the question even for a iron block car. Getting in that range is reachable without AC and supporting Porsche hardware, no cat, no factory sound deading, getting rid of the factory carpeting and so on.
944v8inDFW- Posts : 147
Join date : 2009-06-17
Re: new buyer, looking for info
OH and RH has taken over kingofchode.com as well. Crappy deal but you got to keep a finger on the competition!
944v8inDFW- Posts : 147
Join date : 2009-06-17
Re: new buyer, looking for info
944v8inDFW wrote:OH and RH has taken over kingofchode.com as well. Crappy deal but you got to keep a finger on the competition!
What is kingofchode.com?
Re: new buyer, looking for info
As I understand it the chode was discovered and named by Da Vinci, during his anatomization (dissections) first thought to be a vey important part to maintain balance. Then later discovered to be just a worthless waste of skin.
So somewhere in the last 100 years or so it has became a slang / dirogitory term for a fu**up or being worthless. We commonly call the chode of Da Vinci discovery the “taint"
So somewhere in the last 100 years or so it has became a slang / dirogitory term for a fu**up or being worthless. We commonly call the chode of Da Vinci discovery the “taint"
944v8inDFW- Posts : 147
Join date : 2009-06-17
Re: new buyer, looking for info
_________________
[You must be registered and logged in to see this image.]
[You must be registered and logged in to see this link.]
944-LT1- Moderator
- Posts : 1265
Join date : 2009-06-09
Age : 102
Location : NOTRE DAME
Re: new buyer, looking for info
So we can extrapolate a chode is half a**hole half ballsack.
944v8inDFW- Posts : 147
Join date : 2009-06-17
Re: new buyer, looking for info
...And I was one of the "Choden (or "Tainted") Ones" in June.
Rage Against The Machine has something for that...
(I am not a DJ, but I do enjoy dat funkee muzak ocassionally, Wyte Boyeee)
"...While on the corner
The jury's sleepless
We found your weakness
And it's right outside your door
...Now testify
It's right outside your door...
Who controls the past now controls the future
Who controls the present now controls the past
Who controls the past now controls the future
Who controls the present now?
...Now testify."
Uhhhh...
Spin it one time DJ Mann.
Rage Against The Machine has something for that...
(I am not a DJ, but I do enjoy dat funkee muzak ocassionally, Wyte Boyeee)
"...While on the corner
The jury's sleepless
We found your weakness
And it's right outside your door
...Now testify
It's right outside your door...
Who controls the past now controls the future
Who controls the present now controls the past
Who controls the past now controls the future
Who controls the present now?
...Now testify."
Uhhhh...
Spin it one time DJ Mann.
Last edited by gt1scca on Fri Jan 15, 2010 10:39 pm; edited 1 time in total
gt1scca- Posts : 795
Join date : 2009-06-08
Age : 55
Location : Belton, SC
That's my kinda Flava....
Yeaaaaah Boiiiiiiiiiiii
xschop- Posts : 2711
Join date : 2009-06-09
Location : OKC
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
Today at 7:08 am by gwistrup
» Best engine uprights/plates
Yesterday at 10:12 am by Nath1142
» LEAKING TPC HYDROBOOST
Mon Apr 22, 2024 7:22 pm by lowform
» HYDRAULIC THROWOUT/RELEASE BEARING NOT ENGAGING FULLY
Mon Apr 22, 2024 7:12 pm by lowform
» Fesler Saratoga Top
Mon Apr 15, 2024 7:28 pm by JW1970
» Ray's 1987 944 LS1 Build & Swap
Mon Apr 15, 2024 6:59 pm by JW1970
» LS 982 5speed project here
Mon Apr 15, 2024 9:51 am by Raymond-P
» LT1 Spark Plug make and model
Fri Apr 12, 2024 3:07 pm by Rob44
» 928 5-speed kit
Wed Apr 10, 2024 10:09 pm by LS982
» Slave Cylinder Spacing from Clutch Fingers
Tue Apr 09, 2024 1:54 am by lowform