HomeHOW TO DO AN ADVANCED SEARCH.
Mon Jul 08, 2013 3:56 pm by Admin
For the benefit of 944Hybrids users there are two search functions available for you to use.
The purpose of this sticky is to explain the "Advanced Search" function because it is much more powerful and is the best choice when researching information.
When you log on to the site a list of options is shown in a line at the top of the page. One option is labelled "Search", use this option (NOT the search box lower down on the right).
After you click on the upper search option, a drop down box appears. At the bottom of this box is a radio button marked "Advanced …
Comments: 0
Similar topics
Latest topics
Log in
Vibration?? Only when accelerating.
4 posters
Page 1 of 1
Vibration?? Only when accelerating.
ROGUE S2 Sun May 29, 2011 10:18 pm
Hey Guys, Would like to get your thoughts on a vibration problem. My car runs great, very happy with its performance. I have put about 4000 miles on it since the conversion. The vibration is at 3000rpm and above only when I'm into the gas really hard. I mainly feel it in my shifter,but you can feel it through out the car. Motor mounts are new and I have an Ultra transmission mount from Lydsey Racing. I am leaning towards maybe torque tube bearings or aluminum fly wheel out of balance? What do you Guru's think. Thanks 
ROGUE S2- Posts : 35
Join date : 2010-02-03
Location : MIDLOTHIAN,TEXAS
Re: Vibration?? Only when accelerating.
Porch Mon May 30, 2011 2:35 am
Could be a harmonic balancer as well.
Is this new? On the other hand i think that the LS engine has a natural harmonic that gets amplified pretty well in our cars, especially when paired with more solid motor/trans mounts.
Is this new? On the other hand i think that the LS engine has a natural harmonic that gets amplified pretty well in our cars, especially when paired with more solid motor/trans mounts.
Porch- Posts : 851
Join date : 2009-09-02
Age : 42
Re: Vibration?? Only when accelerating.
pormgb Mon May 30, 2011 2:49 pm
Hmmm,
I'm having the same problem and was wondering if it my Flywheel/PP out of balance, I'm using an aftermarket balancer. When looking at the motor I don't notice any vibration, when sitting in the car and driving I do notice it, mine feels more like a shudder when revving from around 1500 to 3k rpm it then becomes very light. I'm also using urethane motor mounts with a modified (filled with urethane) tranny mount.
I'm having the same problem and was wondering if it my Flywheel/PP out of balance, I'm using an aftermarket balancer. When looking at the motor I don't notice any vibration, when sitting in the car and driving I do notice it, mine feels more like a shudder when revving from around 1500 to 3k rpm it then becomes very light. I'm also using urethane motor mounts with a modified (filled with urethane) tranny mount.
pormgb- Posts : 186
Join date : 2010-09-09
Location : San Diego
Re: Vibration?? Only when accelerating.
pormgb Wed Jun 29, 2011 8:27 pm
Well, I was preparing to drop my tranny then torque tube, pull out the clutch, PP and flywheel then send them off for balancing.
I just drove the car after a major tune and tightening of my engine mounts, the vibration has pretty much gone. I still get a very light vibration but nothing like before, I still need to get my motor professionally tuned. My logging software shows some fueling issues up to 3K RPM that corresponded with my vibration, the car was running quite lean at high RPMs and rich at low. I think the vibration was my motor rocking back and forth due to its bad state of tune, my loose engine mounts probably amplified the problem. Boy am I relieved.
I just drove the car after a major tune and tightening of my engine mounts, the vibration has pretty much gone. I still get a very light vibration but nothing like before, I still need to get my motor professionally tuned. My logging software shows some fueling issues up to 3K RPM that corresponded with my vibration, the car was running quite lean at high RPMs and rich at low. I think the vibration was my motor rocking back and forth due to its bad state of tune, my loose engine mounts probably amplified the problem. Boy am I relieved.
pormgb- Posts : 186
Join date : 2010-09-09
Location : San Diego
Re: Vibration?? Only when accelerating.
skywalker01 Thu Jun 30, 2011 5:33 am
Sorry guys - just started reading this thread, but I noticed an increase in vibration when I installed solid transmission mounts - are any of you running with solid tranny mounts?
skywalker01- Posts : 477
Join date : 2009-07-22
Age : 60
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
» LEAKING TPC HYDROBOOST
» Fesler Saratoga Top
» Parts availability for general maintenance?
» What coilover spring rates are you running with torsion bar removed?
» 944 Turbo TPC Radiator Install Help Needed
» HYDRAULIC THROWOUT/RELEASE BEARING NOT ENGAGING FULLY
» Best engine uprights/plates
» Rear coilover suspension setup
» Ray's 1987 944 LS1 Build & Swap