HOW TO DO AN ADVANCED SEARCH.
Mon Jul 08, 2013 3:56 pm by Admin
For the benefit of 944Hybrids users there are two search functions available for you to use.
The purpose of this sticky is to explain the "Advanced Search" function because it is much more powerful and is the best choice when researching information.
When you log on to the site a list of options is shown in a line at the top of the page. One option is labelled "Search", use this option (NOT the search box lower down on the right).
After you click on the upper search option, a drop down box appears. At the bottom of this box is a radio button marked "Advanced …
Comments: 0
Latest topics
Log in
Grassroots Motorsports $2010 Challenge
4 posters
Page 1 of 1
Grassroots Motorsports $2010 Challenge
I'm new here and wanted to introduce myself. I'm in Joplin, MO and I'm starting a Swap. A friend and I picked up a ragged out (I think 85 944) for &350 and a 2000 5.3 truck motor $250. So far we're starting to collect parts. It looks like we're going to build this car for around $1700. Its not going to be the fastest or the prettiest but it will be fun to drive. I'm going to be asking a lot of questions and I'm looking forward to getting to know some of you guys.
If this wasn't a budget build I would be using an all aluminum motor. I will start posting pictures once we get started.
"There is no subsititute for cubic inches or more horsepower"
Mark
If this wasn't a budget build I would be using an all aluminum motor. I will start posting pictures once we get started.
"There is no subsititute for cubic inches or more horsepower"
Mark
samsdad- Posts : 8
Join date : 2010-02-28
Re: Grassroots Motorsports $2010 Challenge
I was reading the rules for the Grassroots, today after you called me, It looks like you can buy the QT bell housing and claim it to be a scatters shield and not have the cost go towards your budget. It's just a thought. Unless you have the C5 bell housing and can make your own adapter.
Re: Grassroots Motorsports $2010 Challenge
Eric
I have a line on a C5 bell housing. I also have a standard sbc bell housing to use if that falls thru.
I have considered the QT bell housing but the engine is stock and I can always upgrade if I bump up the horsepower.
Mark
I have a line on a C5 bell housing. I also have a standard sbc bell housing to use if that falls thru.
I have considered the QT bell housing but the engine is stock and I can always upgrade if I bump up the horsepower.
Mark
samsdad- Posts : 8
Join date : 2010-02-28
Re: Grassroots Motorsports $2010 Challenge
Sweet, it will be cool to see another 944 V8 compete again!
Grassroots
Turbobob
Have you been a participant in the challenge?
Mark
Have you been a participant in the challenge?
Mark
samsdad- Posts : 8
Join date : 2010-02-28
Re: Grassroots Motorsports $2010 Challenge
No but I always wanted to go. I just watched and read about them in the magazine.
I remember talking to one of the guys that was in in it one year but can't remember. Suffering from CRS!
I remember talking to one of the guys that was in in it one year but can't remember. Suffering from CRS!
on the cheap
doing the same swap...whats your plan for an adapter...just make one or??
COLD44- Posts : 5
Join date : 2010-05-19
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
Today at 7:08 am by gwistrup
» Best engine uprights/plates
Yesterday at 10:12 am by Nath1142
» LEAKING TPC HYDROBOOST
Mon Apr 22, 2024 7:22 pm by lowform
» HYDRAULIC THROWOUT/RELEASE BEARING NOT ENGAGING FULLY
Mon Apr 22, 2024 7:12 pm by lowform
» Fesler Saratoga Top
Mon Apr 15, 2024 7:28 pm by JW1970
» Ray's 1987 944 LS1 Build & Swap
Mon Apr 15, 2024 6:59 pm by JW1970
» LS 982 5speed project here
Mon Apr 15, 2024 9:51 am by Raymond-P
» LT1 Spark Plug make and model
Fri Apr 12, 2024 3:07 pm by Rob44
» 928 5-speed kit
Wed Apr 10, 2024 10:09 pm by LS982
» Slave Cylinder Spacing from Clutch Fingers
Tue Apr 09, 2024 1:54 am by lowform