HomeHOW TO DO AN ADVANCED SEARCH.
Mon Jul 08, 2013 3:56 pm by Admin
For the benefit of 944Hybrids users there are two search functions available for you to use.
The purpose of this sticky is to explain the "Advanced Search" function because it is much more powerful and is the best choice when researching information.
When you log on to the site a list of options is shown in a line at the top of the page. One option is labelled "Search", use this option (NOT the search box lower down on the right).
After you click on the upper search option, a drop down box appears. At the bottom of this box is a radio button marked "Advanced …
Comments: 0
Similar topics
Latest topics
Log in
Vaccum lines with no emissions
944Hybrids: 924/944/968 and 928 V8 Conversions :: Technical Stuff (other than motors) :: General Mechanical
Page 1 of 1
Vaccum lines with no emissions
cfgioja Fri Jul 02, 2010 11:58 pm
I did a search and wound up with nothing, I might have spelt it wrong too. I know this has been discussed on some terms before though.
I have no emissions on my engine and hope on running a heater and a/c. Tonight though I realized that the a/c, heater h-valve, and vents require vacum line from the look of the hoses in the firewall.
How do i go about hooking up vaccum to these without emissions? I am not familar in this area.
Thanks
I have no emissions on my engine and hope on running a heater and a/c. Tonight though I realized that the a/c, heater h-valve, and vents require vacum line from the look of the hoses in the firewall.
How do i go about hooking up vaccum to these without emissions? I am not familar in this area.
Thanks
cfgioja- Posts : 804
Join date : 2009-11-22
Age : 39
Location : Clarksville, AR
Similar topics» Help with Vaccum Lines
» Heat sleeving for remote oil lines and coolant lines
» Emissions and readiness monitors
» Heat sleeving for remote oil lines and coolant lines
» Emissions and readiness monitors
944Hybrids: 924/944/968 and 928 V8 Conversions :: Technical Stuff (other than motors) :: General Mechanical
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
» LEAKING TPC HYDROBOOST
» Fesler Saratoga Top
» Parts availability for general maintenance?
» What coilover spring rates are you running with torsion bar removed?
» 944 Turbo TPC Radiator Install Help Needed
» HYDRAULIC THROWOUT/RELEASE BEARING NOT ENGAGING FULLY
» Best engine uprights/plates
» Rear coilover suspension setup
» Ray's 1987 944 LS1 Build & Swap