Modified 944 Front Suspension - Complete

I have a unique suspension setup that I am willing to part with. This was built and designed for a racing setup – original car was a 1983 944. The premise of the design was to “get rid” of the weakened hollow spindle on the early 944’s but maintain the ease of the rebuildable struts and steel control arms that the early cars have. I used xschop’s design from 944hybrids for the piece that needs to be added to the strut assembly. This was fabricated locally here in Buffalo, NY. The cut out section was completed on a mill, to ensure proper removal. The assembly was then blasted and painted in Koni Yellow. This is a complete kit – will include both driver and passenger side. I have a fully cleaned crossmember that I will also include if the buyer does local pickup. Over 2k was dumped into this including parts, labor, and paint.

What’s Included:  
- Driver and Passenger modified 1983 944 strut assemblies, painted Koni Yellow
- Koni 8641 1038 Sport Inserts – Installed in both strut assemblies.
- Ground Control Camber Plates
- Paragon products – Coil Over Kit
- Hyperco 400# springs
- New Control Arms – Early
- PowerFlex PFF85-213 Bushings
- Racers Edge Delrin Bushings
- New Control Arm Hardware
- ’87 Spindles and Hubs – Non ABS purchased from John Graves

Looking for $1,400  – Free Shipping to Continental US.

I also have the original manual steering setup I could bundle in - new tie rod ends on that. PM me if that's something you would want.

[You must be registered and logged in to see this image.]