HomeHOW TO DO AN ADVANCED SEARCH.
Mon Jul 08, 2013 3:56 pm by Admin
For the benefit of 944Hybrids users there are two search functions available for you to use.
The purpose of this sticky is to explain the "Advanced Search" function because it is much more powerful and is the best choice when researching information.
When you log on to the site a list of options is shown in a line at the top of the page. One option is labelled "Search", use this option (NOT the search box lower down on the right).
After you click on the upper search option, a drop down box appears. At the bottom of this box is a radio button marked "Advanced …
Comments: 0
Similar topics
Latest topics
Log in
LS 928 5speed project here
3 posters
944Hybrids: 924/944/968 and 928 V8 Conversions :: 928 Conversions :: 928 LTX / LSX / SBC Conversions
Page 1 of 1
LS 928 5speed project here
LS928 Wed Apr 10, 2024 10:21 pm
Hello friends,
Thank you for the great forum. I was recomended come to here from Rennlist forum.
I have 1982 982S 5-speed with burnt engine harness and engine what I have never seen running. So it is quite easy decision to go with LS.
few questions.. ( yes I saw the search button
)
Does the weight ratio of the car suffer too much with all aluminium LS3 ?
How the stock 5 speed survive with C6 430 hp LS3 in street ?
Thank you for the great forum. I was recomended come to here from Rennlist forum.
I have 1982 982S 5-speed with burnt engine harness and engine what I have never seen running. So it is quite easy decision to go with LS.
few questions.. ( yes I saw the search button
)Does the weight ratio of the car suffer too much with all aluminium LS3 ?
How the stock 5 speed survive with C6 430 hp LS3 in street ?
LS928- Posts : 3
Join date : 2024-04-10
Re: LS 928 5speed project here
Raymond-P Sun Apr 14, 2024 3:07 pm
LS928,
From what I can gather, your 928S V8 engine weighs in at 260 Kg (573 lbs.) according to the Porsche Manual. I presume that's complete with accessories.
CORRECTION: I thought 982 was a typo for "928." My bad! The 3.4L 982 Boxster engines weighs in at just under 400 pounds including the flywheel. (Someone actually weighed it!)
Below is what the LS1Tech guys have to say about the LS3 as of Feb 26, 2020
Length: 26.08 inches
Height: 28.89 inches
Width: 29.05 inches
Weight: 430 pounds (with accessories). GM 6.2-liter LS3 V8
As for the transaxle holding up under LSX HP, the conventional wisdom (for the 944 anyway) is to go with a turbo model transaxle, add a case reinforcement plate, never drop the clutch, and refrain from speed shifting. Under these conditions, 500 BHP is sustainable. Of course...every set up is a bit different and every driver is a bit different, so results will vary.
I'm sure a few more forum folks with more street & track experience in there 948's will chime in!
CORRECTION: I thought 982 was a typo for "928." My bad! The 3.4L 982 Boxster engines weighs in at just under 400 pounds including the flywheel. (Someone actually weighed it!)
Below is what the LS1Tech guys have to say about the LS3 as of Feb 26, 2020
Length: 26.08 inches
Height: 28.89 inches
Width: 29.05 inches
Weight: 430 pounds (with accessories). GM 6.2-liter LS3 V8
As for the transaxle holding up under LSX HP, the conventional wisdom (for the 944 anyway) is to go with a turbo model transaxle, add a case reinforcement plate, never drop the clutch, and refrain from speed shifting. Under these conditions, 500 BHP is sustainable. Of course...every set up is a bit different and every driver is a bit different, so results will vary.
I'm sure a few more forum folks with more street & track experience in there 948's will chime in!
Last edited by 948 on Wed May 15, 2024 8:56 pm; edited 2 times in total (Reason for editing : Correction)
Raymond-P- Posts : 392
Join date : 2013-06-29
Age : 69
Location : Beaver, PA
LS928 likes this post
Re: LS 928 5speed project here
LS928 Mon Apr 15, 2024 12:17 am
Raymond-P wrote:LS982,From what I can gather, your 928S V8 engine weighs in at 260 Kg (573 lbs.) according to the Porsche Manual. I presume that's complete with accessories.
CORRECTION: I thought 982 was a typo for "928." My bad! The 3.4L 982 Boxster engines weighs in at just under 400 pounds including the flywheel. (Someone actually weighed it!)
Below is what the LS1Tech guys have to say about the LS3 as of Feb 26, 2020
Length: 26.08 inches
Height: 28.89 inches
Width: 29.05 inches
Weight: 430 pounds (with accessories). GM 6.2-liter LS3 V8
As for the transaxle holding up under LSX HP, the conventional wisdom (for the 944 anyway) is to go with a turbo model transaxle, add a case reinforcement plate, never drop the clutch, and refrain from speed shifting. Under these conditions, 500 BHP is sustainable. Of course...every set up is a bit different and every driver is a bit different, so results will vary.
I'm sure a few more forum folks with more street & track experience in there 948's will chime in!
Hello... Yes IT IS TYPO!!! Whan an idiot I have been.. Even my forum nick is wrong...
Yes the car is 1982 928 S 16 valve 4.7 litre V8.
Sorry!!!!!!!
LS928- Posts : 3
Join date : 2024-04-10
Re: LS 928 5speed project here
Raymond-P Mon Apr 15, 2024 9:51 am
No worries... typos are the easiest thing to fix! 
Raymond-P- Posts : 392
Join date : 2013-06-29
Age : 69
Location : Beaver, PA
Re: LS 928 5speed project here
948 Wed May 15, 2024 8:57 pm
Raymond-P wrote:No worries... typos are the easiest thing to fix!
Yes, yes they are.
948- Moderator
- Posts : 577
Join date : 2009-06-09
Age : 109
Location : East PA
944Hybrids: 924/944/968 and 928 V8 Conversions :: 928 Conversions :: 928 LTX / LSX / SBC Conversions
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
» Modified 944 Front Suspension - Complete
» Monster wide body LT-1 for sale
» Ealoken 951 project ( 07k next )
» WTB LSD Trans for 1986 NA
» 88 951 LS1 TRACK CAR FOR SALE
» JP's LS1 Conversion
» 928 Wilwood Integra Caliper Adapters
» 930 CV adapters
» Ray's 1987 944 LS1 Build & Swap