HOW TO DO AN ADVANCED SEARCH.
Mon Jul 08, 2013 3:56 pm by Admin
For the benefit of 944Hybrids users there are two search functions available for you to use.
The purpose of this sticky is to explain the "Advanced Search" function because it is much more powerful and is the best choice when researching information.
When you log on to the site a list of options is shown in a line at the top of the page. One option is labelled "Search", use this option (NOT the search box lower down on the right).
After you click on the upper search option, a drop down box appears. At the bottom of this box is a radio button marked "Advanced …
Comments: 0
Similar topics
Latest topics
Log in
383 Stroker Pistons For Sale
944Hybrids: 924/944/968 and 928 V8 Conversions :: For Sale & Wanted :: For Sale & Wanted (Vendors Limited...)
Page 1 of 1
383 Stroker Pistons For Sale
Heya guys, picked these up this summer, was thinking about building a stroker motor out of my spare LT1 block, but decided that would never happen...they are currently listed on eBay for 200 plus 20 shipping to the lower 48...i will do 200 shipped for you guys...i'll copy the ebay ad in here and include the link so ya'll can check them out and i don't have to retype everything!
Thanks guys!
Ethan
[You must be registered and logged in to see this link.]
I have up for a sale a set of brand new KB stroker/hypereutectic pistons. You can see the Summit Racing listing here... [You must be registered and logged in to see this link.]
I got these pistons from the Summit Racing store in Ohio...I stopped by there as I was passing through this summer. These were a demo that they had put on sale, so I picked them up. I was thinking of using them to build a 383 stroker motor with a spare 350 block I have lying around, but I decided I don't have the funds or the need or want to build another motor at the moment. So I'm passing on the savings I got to you guys! These pistons were never installed in anything, they will need a good cleaning though, there is some glue residue on the pistons from the packing tape that Summit used to repackage them after they removed them from demo duty. I personally have not tried cleaning them, but I did cut the tape off the box and pulled the pistons free from it. I will be repackaging them a little better, but will be reusing the box they came in, at the very least so the buyer can see the part numbers on the box to verify that the parts are as advertised. As a side note, there is no warranty expressed or implied regarding this product, these are sold as is, I have tried to describe them to the best of my ability, if you have any questions please feel free to contact me, I will try to respond ASAP.
Part number is UEM-KB134-030 for the Summit Racing listing, the part number provided by Keith Black is KB134-030
Here are some specs from the Summit listing.
Bore (in): 4.030 in.
Bore (mm): 102.362mm
Piston Style: Flat top, with two valve reliefs
Piston Material: Hypereutectic aluminum
Compression Distance (in): 1.433 in.
Piston Head Volume (cc): +7.00cc
Wrist Pin Style: Press-fit or floating
Pin Diameter (in): 0.927 in.
Piston Ring Thickness: 5/64 in. x 5/64 in. x 3/16 in.
Quantity: Sold as a set of 8.
Notes: Piston weight 505g, pin weight 145g
Thanks guys!
Ethan
[You must be registered and logged in to see this link.]
I have up for a sale a set of brand new KB stroker/hypereutectic pistons. You can see the Summit Racing listing here... [You must be registered and logged in to see this link.]
I got these pistons from the Summit Racing store in Ohio...I stopped by there as I was passing through this summer. These were a demo that they had put on sale, so I picked them up. I was thinking of using them to build a 383 stroker motor with a spare 350 block I have lying around, but I decided I don't have the funds or the need or want to build another motor at the moment. So I'm passing on the savings I got to you guys! These pistons were never installed in anything, they will need a good cleaning though, there is some glue residue on the pistons from the packing tape that Summit used to repackage them after they removed them from demo duty. I personally have not tried cleaning them, but I did cut the tape off the box and pulled the pistons free from it. I will be repackaging them a little better, but will be reusing the box they came in, at the very least so the buyer can see the part numbers on the box to verify that the parts are as advertised. As a side note, there is no warranty expressed or implied regarding this product, these are sold as is, I have tried to describe them to the best of my ability, if you have any questions please feel free to contact me, I will try to respond ASAP.
Part number is UEM-KB134-030 for the Summit Racing listing, the part number provided by Keith Black is KB134-030
Here are some specs from the Summit listing.
Bore (in): 4.030 in.
Bore (mm): 102.362mm
Piston Style: Flat top, with two valve reliefs
Piston Material: Hypereutectic aluminum
Compression Distance (in): 1.433 in.
Piston Head Volume (cc): +7.00cc
Wrist Pin Style: Press-fit or floating
Pin Diameter (in): 0.927 in.
Piston Ring Thickness: 5/64 in. x 5/64 in. x 3/16 in.
Quantity: Sold as a set of 8.
Notes: Piston weight 505g, pin weight 145g
v8944- Posts : 211
Join date : 2009-06-09
Age : 33
Location : Bowie, MD
Re: 383 Stroker Pistons For Sale
Just wanted to bump these up to the top and see if i get any hits, still have these things, they're brand new and gorgeous!
v8944- Posts : 211
Join date : 2009-06-09
Age : 33
Location : Bowie, MD
Similar topics
» 383 stroker rods and pistons
» 944S Transaxle (transmission) For Sale
» Wilwood 4 Pistons front brakes for 944NA
» 944S Transaxle (transmission) For Sale
» Wilwood 4 Pistons front brakes for 944NA
944Hybrids: 924/944/968 and 928 V8 Conversions :: For Sale & Wanted :: For Sale & Wanted (Vendors Limited...)
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
Yesterday at 8:57 pm by 948
» Ray's 1987 944 LS1 Build & Swap
Yesterday at 8:50 pm by 948
» C5 bellhousing to torque tube adapter plate.
Mon May 13, 2024 1:40 pm by Claytonhaske
» 951 Transaxles For Sale
Wed May 08, 2024 6:44 pm by Raindoc
» Turbo Transaxle wanted
Wed May 08, 2024 4:26 pm by Raindoc
» Adapter plate
Tue May 07, 2024 3:06 pm by Rob44
» LEAKING TPC HYDROBOOST
Wed May 01, 2024 8:32 am by Rob44
» Fesler Saratoga Top
Tue Apr 30, 2024 8:28 am by JW1970
» Parts availability for general maintenance?
Mon Apr 29, 2024 10:36 pm by zenon
» What coilover spring rates are you running with torsion bar removed?
Mon Apr 29, 2024 10:24 pm by zenon