HOW TO DO AN ADVANCED SEARCH.
Mon Jul 08, 2013 3:56 pm by Admin
For the benefit of 944Hybrids users there are two search functions available for you to use.
The purpose of this sticky is to explain the "Advanced Search" function because it is much more powerful and is the best choice when researching information.
When you log on to the site a list of options is shown in a line at the top of the page. One option is labelled "Search", use this option (NOT the search box lower down on the right).
After you click on the upper search option, a drop down box appears. At the bottom of this box is a radio button marked "Advanced …
Comments: 0
Latest topics
Log in
NEWB FROM MS
5 posters
Page 1 of 1
NEWB FROM MS
Hey everybody! I have been tossing around the idea for quite a while about doing this swap and I finally made up my mind. I was going to do the larger turbo build ect....but, I wanted a "reliable" fast 951. So, come monday I am purchasing a LS1 with 60k miles on it complete with ECU/Harness and a tranny that I will be selling. Hope to learn a lot more from everybody! Any tips or comments, let me know!
the951racer- Posts : 135
Join date : 2012-01-11
Age : 40
Location : Madison, MS
Re: NEWB FROM MS
Another one sees the light. Welcome aboard. The 948 breaks the CFR barrier (Cheap, Fast, Reliable). Use the search function and 4th link from left at top of page for your parts (TPC). Everyone is helpful and most importantly knowledgeable in the swap and electronics to get it done.
xschop- Posts : 2711
Join date : 2009-06-09
Location : OKC
Re: NEWB FROM MS
Hey there! You commented on my video - nice to see you made it this way! Lots of good information to help you with your conversion. Welcome aboard!!
skywalker01- Posts : 477
Join date : 2009-07-22
Age : 60
Hi
Welcome to the forum, as Xschop said there is a wealth of information on this site.
I would recommend that you use the search function or just browse the site and read, read, read.
As you read, make notes and you will accumulate a lot of knowledge.
Please remember that this conversion generates a very fast vehicle, so be sure to uprate the brakes.
I would recommend that you use the search function or just browse the site and read, read, read.
As you read, make notes and you will accumulate a lot of knowledge.
Please remember that this conversion generates a very fast vehicle, so be sure to uprate the brakes.
fliermike45- Posts : 778
Join date : 2009-09-19
Re: NEWB FROM MS
What part of MS are you from?
laptop_geek- Posts : 230
Join date : 2010-05-14
Age : 33
Location : Memphis, TN
Re: NEWB FROM MS
Thanks guys! I'm glad to be here. I think I have seen and posted on almost every LS1 Porsche video on youtube. You guys inspired me that's for sure. I'm located in Madison just north of Jackson. Anybody somewhat close to me with one of these beasts?
the951racer- Posts : 135
Join date : 2012-01-11
Age : 40
Location : Madison, MS
Re: NEWB FROM MS
the951racer wrote:Thanks guys! I'm glad to be here. I think I have seen and posted on almost every LS1 Porsche video on youtube. You guys inspired me that's for sure. I'm located in Madison just north of Jackson. Anybody somewhat close to me with one of these beasts?
I drive down to LA every couple of months to see my parents and pass by there. We might have to meet up on one of my trips down there. Infact I normally get off at exit 108/109 as my gas/food stop.
laptop_geek- Posts : 230
Join date : 2010-05-14
Age : 33
Location : Memphis, TN
Re: NEWB FROM MS
laptop_geek wrote:the951racer wrote:Thanks guys! I'm glad to be here. I think I have seen and posted on almost every LS1 Porsche video on youtube. You guys inspired me that's for sure. I'm located in Madison just north of Jackson. Anybody somewhat close to me with one of these beasts?
I drive down to LA every couple of months to see my parents and pass by there. We might have to meet up on one of my trips down there. Infact I normally get off at exit 108/109 as my gas/food stop.
Yea definitely! I would love to check out your car prior to mine being done. Just got the motor pulled out today thanks to this site for the info! Saved a lot of frustration! It only took me about 12 hours or so and some much needed help from my Dad and some buddies....and beer.
the951racer- Posts : 135
Join date : 2012-01-11
Age : 40
Location : Madison, MS
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
Today at 4:14 pm by SpeedRacer11
» Rear coilover suspension setup
Today at 3:30 pm by ThomasJoseph315
» Best engine uprights/plates
Yesterday at 10:12 am by Nath1142
» LEAKING TPC HYDROBOOST
Mon Apr 22, 2024 7:22 pm by lowform
» HYDRAULIC THROWOUT/RELEASE BEARING NOT ENGAGING FULLY
Mon Apr 22, 2024 7:12 pm by lowform
» Fesler Saratoga Top
Mon Apr 15, 2024 7:28 pm by JW1970
» Ray's 1987 944 LS1 Build & Swap
Mon Apr 15, 2024 6:59 pm by JW1970
» LS 982 5speed project here
Mon Apr 15, 2024 9:51 am by Raymond-P
» LT1 Spark Plug make and model
Fri Apr 12, 2024 3:07 pm by Rob44
» 928 5-speed kit
Wed Apr 10, 2024 10:09 pm by LS982