HOW TO DO AN ADVANCED SEARCH.
Mon Jul 08, 2013 3:56 pm by Admin
For the benefit of 944Hybrids users there are two search functions available for you to use.
The purpose of this sticky is to explain the "Advanced Search" function because it is much more powerful and is the best choice when researching information.
When you log on to the site a list of options is shown in a line at the top of the page. One option is labelled "Search", use this option (NOT the search box lower down on the right).
After you click on the upper search option, a drop down box appears. At the bottom of this box is a radio button marked "Advanced …
Comments: 0
Similar topics
Latest topics
Log in
Remote oil filter
3 posters
Page 1 of 1
Remote oil filter
Would welcome any pictures showing how you all mounted your remote oil filter.
fliermike45- Posts : 778
Join date : 2009-09-19
Re: Remote oil filter
Hot off the camera....
My remote filter housing is mounted to the DS tie-down bracket; L-bracket bolted to the frame rail. It is easy to get to and somewhat protected. My plumbing runs from the engine, to an oil cooler then through the filter. First pic is looking from the DS wheel well in front of the tyre.
[You must be registered and logged in to see this image.]
My remote filter housing is mounted to the DS tie-down bracket; L-bracket bolted to the frame rail. It is easy to get to and somewhat protected. My plumbing runs from the engine, to an oil cooler then through the filter. First pic is looking from the DS wheel well in front of the tyre.
[You must be registered and logged in to see this image.]
948- Moderator
- Posts : 573
Join date : 2009-06-09
Age : 108
Location : East PA
Similar topics
» those with remote oil filter...
» Remote Oil Filter Location?
» Oil pan fittings for remote filter - install dry?
» Remote Oil Filter Location?
» Oil pan fittings for remote filter - install dry?
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
Today at 11:30 am by Gutterboy
» Honda k24 swap
Yesterday at 6:12 am by Colibri Green
» power steering pump
Tue Mar 26, 2024 3:29 pm by Blaizefed
» FRESH BUILD - after a few miles became hard to get into gear
Tue Mar 26, 2024 1:30 pm by Raymond-P
» VATS Bypass/Delete
Tue Mar 26, 2024 8:49 am by 948
» Ray's 1987 944 LS1 Build & Swap
Wed Mar 20, 2024 11:52 pm by Raymond-P
» Purpose of the speed sensor with a stock ECU
Wed Mar 20, 2024 1:17 pm by Rob44
» FS: Porsche 928 968 944 S2 951 Turbo FRONT BREMBO CALIPERS
Tue Mar 12, 2024 3:22 pm by dcoutofstep
» 944 S2/Turbo J LTD Edition Front Lip Spoiler - Brand New never fitted
Tue Mar 12, 2024 2:10 pm by dcoutofstep
» Adding Purge Solenoid Wiring to Standalone Harness
Tue Mar 12, 2024 12:12 pm by ndog52