944hybrids Forum
Wed Jul 22, 2009 11:30 am by gt1scca
.

Welcome to the 944hybrids Forum, home of the 924 / 944 / 968 / 928 V8 Conversions.
Browse the site or register if you like.

Welcome to the 944hybrids Forum, home of the 924 / 944 / 968 / 928 V8 Conversions.
Browse the site or register if you like.
Comments: 0
Latest topics
Log in
Other engines
944Hybrids: 924/944/968 and 928 V8 Conversions :: 924 / 944 / 968 Conversions :: Turbo V6, V8 & Other Conversions
Page 1 of 1 • Share •
Other engines
There was a guy that was doing or did a audi 5 cylinder swap on rennXX boards.
Ford V8
supra motor?
Other ones any has seen or heard of?
Ford V8
supra motor?
Other ones any has seen or heard of?
alt engines
I seriously considered putting in a 5 cylinder from the Chevy Colorado.....All the headers exit the passengers side, the oil pan is right and they can be had for $1000 to $1500 with everything...... I just happened upon the 5.3l deal first
xschop- Posts: 400
Guru Status: 11
Join date: 2009-06-09
Location: OKC
other engines
There is a Rover V8 3.5L out there somewhere / I think in a 924.
You can do VR6 swaps but I haven't seen any pictures.
Using the 924's bell housing you could do most any I4 VW/Audi engine (2.0T FSI would probably be a good engine)...
The Audi I5 engines have already been discussed - I've seen picts and they fit nicely. Shorter block than the original motor and yet they still lean over to the passenger side to give room for your brake booster.
At the end of the day though the LS conversions still appear to be the best bang for the buck / especially if you can get your conversion parts cheap.
Damian
You can do VR6 swaps but I haven't seen any pictures.
Using the 924's bell housing you could do most any I4 VW/Audi engine (2.0T FSI would probably be a good engine)...
The Audi I5 engines have already been discussed - I've seen picts and they fit nicely. Shorter block than the original motor and yet they still lean over to the passenger side to give room for your brake booster.
At the end of the day though the LS conversions still appear to be the best bang for the buck / especially if you can get your conversion parts cheap.
Damian
alt engines
I also looked at a VQ35 nissan V6. IIRC a Pathfinder bellhousing would have made the swap possible
The 350Z intake is the lowest one for that engine. IIRC the Bellhousing from the Auto interchanged with the Manual and would have been easy to make an adapter plate for the TT since it is already concentric....
http://cgi.ebay.com/ebaymotors/nissan-pathfinder-transmission-and-transfer-case_W0QQcmdZViewItemQQ_trkparmsZ65Q3a12Q7c66Q3a2Q7c39Q3a1Q7c72Q3a1171Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem3ef6929485QQitemZ270424773765QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
The 350Z intake is the lowest one for that engine. IIRC the Bellhousing from the Auto interchanged with the Manual and would have been easy to make an adapter plate for the TT since it is already concentric....
http://cgi.ebay.com/ebaymotors/nissan-pathfinder-transmission-and-transfer-case_W0QQcmdZViewItemQQ_trkparmsZ65Q3a12Q7c66Q3a2Q7c39Q3a1Q7c72Q3a1171Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem3ef6929485QQitemZ270424773765QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
xschop- Posts: 400
Guru Status: 11
Join date: 2009-06-09
Location: OKC
2jz
Not sure if I mentioned previously that I have a great 944 that I just picked up with a blown engine. I did a LS1 conversion in a different 944 and it is a great car. But, with this car, I'd like something different... I've been talking with a dude who really loves Toyota's 2jz - apparently it can be boosted to put out 600-1000 hp before you have to do any work to its internals!
I think it would fit in the 944 / I saw one guy on the web has done it but picts are scarce. Anyone got further info on this kind of swap??
Thanks!
Damian
I think it would fit in the 944 / I saw one guy on the web has done it but picts are scarce. Anyone got further info on this kind of swap??
Thanks!
Damian
Re: Other engines
damian wrote: I've been talking with a dude who really loves Toyota's 2jz - apparently it can be boosted to put out 600-1000 hp before you have to do any work to its internals!
I think it would fit in the 944 / I saw one guy on the web has done it but picts are scarce. Anyone got further info on this kind of swap??
Thanks!
Damian
roblem isgetting the transax to hold up
nyysr- Posts: 2
Guru Status: 2
Join date: 2009-09-15
Decided on an AAN
that is true. To update everyone I actually decided to go with an Audi AAN conversion for this car. I think it's going to work out well... It's on hold right now because I'm also working on a VW Beetle restoration that is currently taking all the car-funds but eventually we'll get into this 944.
Damian
[/quote]
roblem isgetting the transax to hold up
[/quote]
Damian
[/quote]
roblem isgetting the transax to hold up
Re: Other engines
What's the torque on the Audi AAN? HP may not be the issue with a 944 transaxle; V8 torque may be the concern.
_________________
Twice the horsepower, twice the torque, twice the fun!


RobotMachines- Posts: 66
Guru Status: 6
Join date: 2009-08-09
Permissions of this forum:
You cannot reply to topics in this forum
Home





» Late Spindles on Early Struts
» LS3 Harness pin outs
» Conversion Parts For Sale
» LSx hood clearances
» Expuppy told me of you guys, I need help.
» workshop/garage space for rent in DC area.
» Drivers seat and Tall People
» Hybrid Crests / Part D'eux...
» power steering pump