HOW TO DO AN ADVANCED SEARCH.
Mon Jul 08, 2013 3:56 pm by Admin
For the benefit of 944Hybrids users there are two search functions available for you to use.
The purpose of this sticky is to explain the "Advanced Search" function because it is much more powerful and is the best choice when researching information.
When you log on to the site a list of options is shown in a line at the top of the page. One option is labelled "Search", use this option (NOT the search box lower down on the right).
After you click on the upper search option, a drop down box appears. At the bottom of this box is a radio button marked "Advanced …
Comments: 0
Similar topics
Latest topics
Log in
n/a front splitter
3 posters
Page 1 of 1
n/a front splitter
after finally deciding that im going to stick with the non turbo front end on my car ive been looking for something to finish off the front end. i couldnt find a lip and had a heck of a time finding someone who made anything for the non turbo front end. eventually i ran across a thread on a "list" site talking about a group buy several years ago on a splitter made by Joe Toth composites. when i looked them up i discovered his shop was about 10 minutes from mine. i happened to mention it to my boss the other day, and when i went to the shop today he handed it to me.
[You must be registered and logged in to see this image.]
its only propped up right now, i dont have the energy to jack the car up and properly fit it, however so far fitment looks really good. the bolt holes between the side of the bumper to the splitter line up exact, it has mounting provisions to bolt it to the lower rad support, but being i built my own lower rad/intercooler support i have no provisions to bolt it there at the moment. it does look like its designed to bolt right up where the factory undertray does.
[You must be registered and logged in to see this image.]
its only propped up right now, i dont have the energy to jack the car up and properly fit it, however so far fitment looks really good. the bolt holes between the side of the bumper to the splitter line up exact, it has mounting provisions to bolt it to the lower rad support, but being i built my own lower rad/intercooler support i have no provisions to bolt it there at the moment. it does look like its designed to bolt right up where the factory undertray does.
sharkey- Posts : 714
Join date : 2014-11-21
Age : 39
Location : Abbotsford BC
Re: n/a front splitter
I was looking for that exact same thing! Do you know if they have anymore? Price?
Thanks
Thanks
yamamtx- Posts : 97
Join date : 2015-12-12
Re: n/a front splitter
I have one of those Toth n/a splitters that I never used as I went with a turbo front end. If anyone in Seattle wants one, come get it...
Rich
Rich
Rich L.- Posts : 928
Join date : 2011-05-30
Location : Seattle
Re: n/a front splitter
if you look up joe toth composites on facebook you will find his page. he has prices listed there. i think he also sells through tarret engineering although i couldnt find it on their site.
sharkey- Posts : 714
Join date : 2014-11-21
Age : 39
Location : Abbotsford BC
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
Yesterday at 11:30 am by Gutterboy
» Honda k24 swap
Wed Mar 27, 2024 6:12 am by Colibri Green
» power steering pump
Tue Mar 26, 2024 3:29 pm by Blaizefed
» FRESH BUILD - after a few miles became hard to get into gear
Tue Mar 26, 2024 1:30 pm by Raymond-P
» VATS Bypass/Delete
Tue Mar 26, 2024 8:49 am by 948
» Ray's 1987 944 LS1 Build & Swap
Wed Mar 20, 2024 11:52 pm by Raymond-P
» Purpose of the speed sensor with a stock ECU
Wed Mar 20, 2024 1:17 pm by Rob44
» FS: Porsche 928 968 944 S2 951 Turbo FRONT BREMBO CALIPERS
Tue Mar 12, 2024 3:22 pm by dcoutofstep
» 944 S2/Turbo J LTD Edition Front Lip Spoiler - Brand New never fitted
Tue Mar 12, 2024 2:10 pm by dcoutofstep
» Adding Purge Solenoid Wiring to Standalone Harness
Tue Mar 12, 2024 12:12 pm by ndog52