HOW TO DO AN ADVANCED SEARCH.

Mon Jul 08, 2013 3:56 pm by Admin


For the benefit of 944Hybrids users there are two search functions available for you to use.
The purpose of this sticky is to explain the "Advanced Search" function because it is much more powerful and is the best choice when researching information.

When you log on to the site a list of options is shown in a line at the top of the page. One option is labelled "Search", use this option (NOT the search box lower down on the right).

After you click on the upper search option, a drop down box appears. At the bottom of this box is a radio button marked "Advanced …

Comments: 0

Latest topics
» LSA Supercharged 86 Porsche 944
Yesterday at 7:25 pm by LSA_944

» LS3 conversion
Yesterday at 11:00 am by JSP

» robschwieb's 85.5 944 LS1 Swap
Yesterday at 9:16 am by robschwieb

» Blue Alternator Wire
Yesterday at 6:57 am by robschwieb

» A/C parts used for the swap !
Mon Nov 12, 2018 7:37 am by Rothaus

» **FIXED** 944 with LS3 bucking or jerking while cruising or low speed problem
Sun Nov 11, 2018 10:15 pm by Porsche951toLS3

» 944 -> Cayenne 3.2l v6 swap
Fri Nov 09, 2018 4:21 pm by Arno

» Any tips or tricks to fitting a 4" intake setup?
Fri Nov 09, 2018 7:28 am by robschwieb

» 944 LS1, getting started
Thu Nov 08, 2018 1:58 pm by Nik still

» Building Off of Original 944 Engine Mounts?
Mon Nov 05, 2018 9:41 pm by AS15

November 2018
MonTueWedThuFriSatSun
   1234
567891011
12131415161718
19202122232425
2627282930  

Calendar Calendar

Log in

I forgot my password


83 944 Clutch - Master and Slave

Go down

83 944 Clutch - Master and Slave

Post  mred2nice on Mon Mar 06, 2017 9:31 pm

Hello There Everyone!

My project has been sitting for about 5yrs but I have been making slow progress here and there.

I am wondering about that Clutch Master Slave thing. I admit I have never had a hydraulic clutch before. Should I replace it if it has been sitting for a while? I mean I bought the car and started taking it apart right away. Do they go bad? I am not sure if the hose from the part bolted to the firewall is the right kind.

Can anyone help me understand how these parts work together?

Thanks for helping,
Ed

mred2nice

Posts : 70
Join date : 2011-12-26

Back to top Go down

Re: 83 944 Clutch - Master and Slave

Post  sharkey on Tue Mar 07, 2017 12:07 am

think of it as a braking system, the master cylinder is really no different than your brake master cylinder, and your slave cylinder isnt much different than a caliper. yes master cylinders do fail, but its worth trying before you replace it.

sharkey

Posts : 561
Join date : 2014-11-21
Age : 34
Location : Abbotsford BC

Back to top Go down

Re: 83 944 Clutch - Master and Slave

Post  mred2nice on Tue Mar 07, 2017 6:39 am

Ok, thanks. How about that hose that goes to the brake master? Do people replace those? Do you kbow of a good reference material i can check put to better understand how all this works?

mred2nice

Posts : 70
Join date : 2011-12-26

Back to top Go down

Re: 83 944 Clutch - Master and Slave

Post  Rich L. on Tue Mar 07, 2017 7:37 pm

Here's a master cylinder replacement procedure with pictures.

And a slave cylinder replacement procedure with info on bleeding.

In fact, the whole Clark's Garage website is useful: [You must be registered and logged in to see this link.]

Rich
avatar
Rich L.

Posts : 832
Join date : 2011-05-30
Location : Seattle

Back to top Go down

Re: 83 944 Clutch - Master and Slave

Post  mred2nice on Tue Mar 07, 2017 9:49 pm

Good stuff right there...thanks for the website.

mred2nice

Posts : 70
Join date : 2011-12-26

Back to top Go down

Re: 83 944 Clutch - Master and Slave

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum