HOW TO DO AN ADVANCED SEARCH.
Mon Jul 08, 2013 3:56 pm by Admin
For the benefit of 944Hybrids users there are two search functions available for you to use.
The purpose of this sticky is to explain the "Advanced Search" function because it is much more powerful and is the best choice when researching information.
When you log on to the site a list of options is shown in a line at the top of the page. One option is labelled "Search", use this option (NOT the search box lower down on the right).
After you click on the upper search option, a drop down box appears. At the bottom of this box is a radio button marked "Advanced …
Comments: 0
Similar topics
Latest topics
Log in
ls6 batwing oil pan
2 posters
Page 1 of 1
ls6 batwing oil pan
Hey finally getting going on this swap and have a strong running LS6 from my c5 z06 race car build. was wondering if the LS6 batwing oil pan could be used? Seems pretty low profile and the LS6 seems to be fairly durable on the track.
z06801- Posts : 9
Join date : 2011-08-05
Re: ls6 batwing oil pan
Thanks good to know. That pan seems to do a good job. Just starting to disassemble the car now, it took a hit on the nose. Pulling off the damage parts. Might as well start the swap while its tore down.docwyte wrote:The oil pan won't fit.
z06801- Posts : 9
Join date : 2011-08-05
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
Yesterday at 6:12 am by Colibri Green
» NDog52's 1986 NA 5.3 Build
Tue Mar 26, 2024 6:28 pm by Raymond-P
» power steering pump
Tue Mar 26, 2024 3:29 pm by Blaizefed
» FRESH BUILD - after a few miles became hard to get into gear
Tue Mar 26, 2024 1:30 pm by Raymond-P
» VATS Bypass/Delete
Tue Mar 26, 2024 8:49 am by 948
» Ray's 1987 944 LS1 Build & Swap
Wed Mar 20, 2024 11:52 pm by Raymond-P
» Purpose of the speed sensor with a stock ECU
Wed Mar 20, 2024 1:17 pm by Rob44
» FS: Porsche 928 968 944 S2 951 Turbo FRONT BREMBO CALIPERS
Tue Mar 12, 2024 3:22 pm by dcoutofstep
» 944 S2/Turbo J LTD Edition Front Lip Spoiler - Brand New never fitted
Tue Mar 12, 2024 2:10 pm by dcoutofstep
» Adding Purge Solenoid Wiring to Standalone Harness
Tue Mar 12, 2024 12:12 pm by ndog52