HOW TO DO AN ADVANCED SEARCH.

Mon Jul 08, 2013 3:56 pm by Admin


For the benefit of 944Hybrids users there are two search functions available for you to use.
The purpose of this sticky is to explain the "Advanced Search" function because it is much more powerful and is the best choice when researching information.

When you log on to the site a list of options is shown in a line at the top of the page. One option is labelled "Search", use this option (NOT the search box lower down on the right).

After you click on the upper search option, a drop down box appears. At the bottom of this box is a radio button marked "Advanced …

Comments: 0

Latest topics
» Which turbo trans for my swap application?
Yesterday at 8:10 pm by racertomtom

» Poly based strut mounts on exchange
Fri Aug 18, 2017 10:16 pm by xschop

» 18x10" Enkei wheels
Wed Aug 16, 2017 9:59 pm by Sterling Doc

» Around the block
Tue Aug 15, 2017 11:46 am by Red944ls1

» RX7 Caliper Swap
Mon Aug 14, 2017 8:13 am by osx86ftw

» Cooling solutions please!
Sun Aug 13, 2017 3:15 pm by yamamtx

» Holley intake, vacuum pump and cross member spacer
Sun Aug 13, 2017 12:33 am by zeusrotty

» Sparkydog's Abnormal Build - 944 With L67 + Ford Stuff & CARB Legal
Sat Aug 12, 2017 3:42 pm by sparkydog

» LSA Supercharged 86 Porsche 944
Sat Aug 12, 2017 7:41 am by haroldk

» Coolant / header tank cap
Wed Aug 09, 2017 7:56 pm by Arthropraxis

August 2017
MonTueWedThuFriSatSun
 123456
78910111213
14151617181920
21222324252627
28293031   

Calendar Calendar

Log in

I forgot my password


Anyone have a fender rolling tool?

View previous topic View next topic Go down

Anyone have a fender rolling tool?

Post  B.Rudy on Tue Mar 18, 2014 9:26 am

Like the title says...more specifically though i have already borrowed from a friend the Eastwood rolling tool but he doesnt have the porsche adapter thats required for our bolt spacing. Anyone have the porsche adapter?
Btw i know a bats works, but the tool is way better

Thanks,
Bryan

B.Rudy

Posts : 40
Join date : 2009-08-21
Location : Raleigh, NC.

Back to top Go down

Re: Anyone have a fender rolling tool?

Post  Rich L. on Tue Mar 18, 2014 10:37 am

I have the Eastwood tool and modified it for 5x130 by enlarging the bolt holes. Worked great on my 944. It is currently upstate NY with a friend. Perhaps he can send it to you and then when you're done you can sent it up to me in Seattle.
avatar
Rich L.

Posts : 810
Join date : 2011-05-30
Location : Seattle

Back to top Go down

Re: Anyone have a fender rolling tool?

Post  B.Rudy on Tue Mar 18, 2014 10:59 am

Question; it didnt seem to affect the tool strength wise? I noticed there is a position where the holes are close but just need to be elongated like you said. I would definitely need to ask my buddys permission before modifying his tool. He's not a porsche guy so i could see him not being cool with it.

I will definitely let you know! Thank you for the offering
-bryan

B.Rudy

Posts : 40
Join date : 2009-08-21
Location : Raleigh, NC.

Back to top Go down

Re: Anyone have a fender rolling tool?

Post  Rich L. on Tue Mar 18, 2014 11:02 am

Well, I'm sure it did reduce the strength of the flange. But I felt it was overkill before and more than sufficient afterwards. Let me know, I've been hoping for an excuse to get my buddy in NY to cough it up.
avatar
Rich L.

Posts : 810
Join date : 2011-05-30
Location : Seattle

Back to top Go down

Re: Anyone have a fender rolling tool?

Post  Techno Duck on Tue Mar 18, 2014 12:41 pm

I have read even with the truck adapter the roller does not fit our cars due to the extra attachment. I have slotted the holes on my friends to fit the Porsches, still works without issue on other cars also.

[You must be registered and logged in to see this image.]

[You must be registered and logged in to see this image.]

Techno Duck

Posts : 447
Join date : 2010-12-01
Location : San Diego, CA

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum