HOW TO DO AN ADVANCED SEARCH.
Mon Jul 08, 2013 3:56 pm by Admin
For the benefit of 944Hybrids users there are two search functions available for you to use.
The purpose of this sticky is to explain the "Advanced Search" function because it is much more powerful and is the best choice when researching information.
When you log on to the site a list of options is shown in a line at the top of the page. One option is labelled "Search", use this option (NOT the search box lower down on the right).
After you click on the upper search option, a drop down box appears. At the bottom of this box is a radio button marked "Advanced …
Comments: 0
Latest topics
Log in
Convertion d'un francaise
+13
cfgioja
gt1scca
Luke714
RobotMachines
Dawgz83948
expuppy
dallas
Tetzuoe
xschop
ffmedic
944-LT1
948
Joe
17 posters
Page 3 of 4
Page 3 of 4 • 1, 2, 3, 4
Re: Convertion d'un francaise
Shipped USPS Priority International...
No tracking number for International shipments through the United States Post Office. This was shipped the least expensive way possible, and two 25 lb. boxes cost $190.20 to ship to France. I cannot control shipping rates, and shipping has increased since I originally quoted shipping to you. The clutch and flywheel had to be shipped separately due to size limitations of the box required to include all parts in one box.
I did not expect shipping rates to increase, but they did. Blame me for your delays if you wish, but you should have your clutch, T/O bearing, flywheel, and hydraulic lines in a day or two - unless customs delays them. The simple truth of the matter is shipping to France is more costly than I had expected, and I have relayed this information to you.
If this is such a huge problem, I will only ship to the continental United States from here forward. I will not argue over international shipping rates, nor problems with European fights being delayed. It is not worth going in debt for shipping charges, simple as that.
No tracking number for International shipments through the United States Post Office. This was shipped the least expensive way possible, and two 25 lb. boxes cost $190.20 to ship to France. I cannot control shipping rates, and shipping has increased since I originally quoted shipping to you. The clutch and flywheel had to be shipped separately due to size limitations of the box required to include all parts in one box.
I did not expect shipping rates to increase, but they did. Blame me for your delays if you wish, but you should have your clutch, T/O bearing, flywheel, and hydraulic lines in a day or two - unless customs delays them. The simple truth of the matter is shipping to France is more costly than I had expected, and I have relayed this information to you.
If this is such a huge problem, I will only ship to the continental United States from here forward. I will not argue over international shipping rates, nor problems with European fights being delayed. It is not worth going in debt for shipping charges, simple as that.
gt1scca- Posts : 795
Join date : 2009-06-08
Age : 55
Location : Belton, SC
Re: Convertion d'un francaise
je vous répond en anglais plus tard. Merci
Joe- Posts : 62
Join date : 2009-08-30
Age : 43
Location : French from paris
Re: Convertion d'un francaise
I blamed you just because when i ask you for a price or an order you answer me directly, it's very fast!
but when the order is making and you have money it's impossible to join you. You don't answer to mails; no informations! it's just that i don't understand.
And more I don't understand why the first order was sending one weeks ago and the other parts after???
but when the order is making and you have money it's impossible to join you. You don't answer to mails; no informations! it's just that i don't understand.
And more I don't understand why the first order was sending one weeks ago and the other parts after???
Joe- Posts : 62
Join date : 2009-08-30
Age : 43
Location : French from paris
Re: Convertion d'un francaise
I will explain once again, for you and everyone else...
These parts, particularly the oil pans, are modified by someone that I pay to perform the modifications. I contract all parts manufacturing to outside sources, and delays for parts production are based on their schedule, not mine. Others have waited patiently for their parts, and their orders have been filled. Shipping charges to Europe and other international locations has increased, and I have no control over shipping charges.
The oil pan was delayed due to outside vendor availability for modification. If all parts were complete at the time the clutch and flywheel shipped, and shipping had not increased for international shipments, it would not have been an issue. If you still want the oil pan, there are additional shipping charges, and it can be shipped tomorrow. If not, I will issue a refund for the oil pan, and you can have one modified yourself.
As far as answering emails...
I HAVE answered you, through email AND PMs, and I cannot sit in front of this computer 24 hours a day answering emails immediately after they are sent. I do not understand your impatience, especially after you have recognized the delays in shipping to Europe. I do not wish to argue over something as minute as shipping times to you, as you have stated "2 months" waiting time. Read the website again - I'll quote it for you:
This is under normal circumstances. The Iceland Volcano is not a normal circumstance, nor are your demands for an immediate email answer. An additional two weeks is not extreme, considering the events I have no control of. Decide what you want - an oil pan, or a refund. I do not care either way. This is my last response to this insanity.
These parts, particularly the oil pans, are modified by someone that I pay to perform the modifications. I contract all parts manufacturing to outside sources, and delays for parts production are based on their schedule, not mine. Others have waited patiently for their parts, and their orders have been filled. Shipping charges to Europe and other international locations has increased, and I have no control over shipping charges.
The oil pan was delayed due to outside vendor availability for modification. If all parts were complete at the time the clutch and flywheel shipped, and shipping had not increased for international shipments, it would not have been an issue. If you still want the oil pan, there are additional shipping charges, and it can be shipped tomorrow. If not, I will issue a refund for the oil pan, and you can have one modified yourself.
As far as answering emails...
I HAVE answered you, through email AND PMs, and I cannot sit in front of this computer 24 hours a day answering emails immediately after they are sent. I do not understand your impatience, especially after you have recognized the delays in shipping to Europe. I do not wish to argue over something as minute as shipping times to you, as you have stated "2 months" waiting time. Read the website again - I'll quote it for you:
NOTE: All pricing includes shipping and handling to the lower 48 states. Alaska, Hawaii, and all International orders, please contact us before ordering for additional shipping costs. Please allow approximately 4-6 weeks for custom parts (and kit) production and shipping. Production and shipping estimates based on current suppliers inventory and production capacity.
This is under normal circumstances. The Iceland Volcano is not a normal circumstance, nor are your demands for an immediate email answer. An additional two weeks is not extreme, considering the events I have no control of. Decide what you want - an oil pan, or a refund. I do not care either way. This is my last response to this insanity.
gt1scca- Posts : 795
Join date : 2009-06-08
Age : 55
Location : Belton, SC
Re: Convertion d'un francaise
Good evening Greg, made me a refunding, because overcost of the expenses d' sending is too important I would prevent via my post conversion of the reception of the part of the order that you m' sent Monday and would warn you good reception of my refunding.
thanks jonathan
thanks jonathan
Joe- Posts : 62
Join date : 2009-08-30
Age : 43
Location : French from paris
Re: Convertion d'un francaise
Joe,
My apologies for the misunderstanding. I will return payment for the oil pan, minus the difference in shipping charges. Thank you for your business, and good luck with your conversion.
Greg
My apologies for the misunderstanding. I will return payment for the oil pan, minus the difference in shipping charges. Thank you for your business, and good luck with your conversion.
Greg
gt1scca- Posts : 795
Join date : 2009-06-08
Age : 55
Location : Belton, SC
Re: Convertion d'un francaise
I have refunded the discounted price of the Moroso Oil Pan, minus the difference in shipping charges of $62.50. The SPEC clutch and flywheel, C5 Slave assembly, and hydraulic hoses are in process of shipping, and the clutch and flywheel are non-refundable per SPEC, Inc.
All future International shipments will be quoted shipping at the time of shipment, to avoid any future discrepancies.
All future International shipments will be quoted shipping at the time of shipment, to avoid any future discrepancies.
gt1scca- Posts : 795
Join date : 2009-06-08
Age : 55
Location : Belton, SC
Re: Convertion d'un francaise
I have refunded the discounted price of the Moroso Oil Pan, minus the difference in shipping charges of $62.50.
OK
That are the parts I must receive , isn't it "send Monday "The SPEC clutch and flywheel, C5 Slave assembly, and hydraulic hoses are in process of shipping
I don't understandand the clutch and flywheel are non-refundable per SPEC, Inc.
All future International shipments will be quoted shipping at the time of shipment, to avoid any future discrepancies
OK
thanks jonathan
Joe- Posts : 62
Join date : 2009-08-30
Age : 43
Location : French from paris
Re: Convertion d'un francaise
I received a payment of 259.80$ and 65.20$ for the shipping charge difference
I'm surprise!!! But..............nobody is dead.......!!!!!
I'm surprise!!! But..............nobody is dead.......!!!!!
Joe- Posts : 62
Join date : 2009-08-30
Age : 43
Location : French from paris
Re: Convertion d'un francaise
thanks a lot to Vorsche948 for your quickly answer and shipment!
Joe- Posts : 62
Join date : 2009-08-30
Age : 43
Location : French from paris
Re: Convertion d'un francaise
lol lol lol
Isn't this another perfect example of why the French are looked as such idiots,MAN! they are so full of themselves.They think the world revolves around them, just personal experiemce!
Isn't this another perfect example of why the French are looked as such idiots,MAN! they are so full of themselves.They think the world revolves around them, just personal experiemce!
vundba- Posts : 33
Join date : 2009-06-15
Location : Belvidere Ill.
Re: Convertion d'un francaise
died of laughing , French thinks like you of you
mort de rire ,les français pense comme vous de vous
mort de rire ,les français pense comme vous de vous
Joe- Posts : 62
Join date : 2009-08-30
Age : 43
Location : French from paris
Re: Convertion d'un francaise
but of course the world revolves around us here in the U.S. Why else does the E.U. and everyone else
blame the U.S. for all of their "problems"!
blame the U.S. for all of their "problems"!
vundba- Posts : 33
Join date : 2009-06-15
Location : Belvidere Ill.
Re: Convertion d'un francaise
This is deteriorating rapidly. Do we need a political forum?
Arthropraxis- Posts : 1103
Join date : 2009-09-02
Re: Convertion d'un francaise
oh lighten up,it's all in good fun !!!! jeeezzzz
I guess I was wrong the French aren't the only ones!
I guess I was wrong the French aren't the only ones!
vundba- Posts : 33
Join date : 2009-06-15
Location : Belvidere Ill.
Re: Convertion d'un francaise
You lighten up.vundba wrote:oh lighten up,it's all in good fun !!!! jeeezzzz
I guess I was wrong the French aren't the only ones!
The context of your post was an attack, plain and simple.
This is not a free-for-all political attack, and that was unnecessary. Everyone is entitled to their own opinion, but it doesn't need to be turned into a circus side-show of overly generalized assumptions based on nationality, race, religion or otherwise.
I personally have no basis for such an attack, and neither should you. I offered a reasonable solution to an issue Jonathan had with his shipment, and truly regret this happened at all. My apologies again to Joe for the delays and shipping issues. Hopefully I have not offended an entire nation the way your attack has, and I am definitely willing to work through any other issues with sales, shipping, or even forum-related issues with anyone - regardless of origin or opinion.
Joe,
Once again, you are welcome here, and I will do what I can to make sure there are no future misunderstandings. Hopefully you will accept my attempt for a reasonable solution.
vundba,
Cool it.
gt1scca- Posts : 795
Join date : 2009-06-08
Age : 55
Location : Belton, SC
Re: Convertion d'un francaise
no problem greg
Joe- Posts : 62
Join date : 2009-08-30
Age : 43
Location : French from paris
Re: Convertion d'un francaise
Where can i buy a harness for my ls6 engine
I saw that on web ,very big price
[You must be registered and logged in to see this link.]
thanks
I saw that on web ,very big price
[You must be registered and logged in to see this link.]
thanks
Joe- Posts : 62
Join date : 2009-08-30
Age : 43
Location : French from paris
Re: Convertion d'un francaise
[You must be registered and logged in to see this link.] makes some awesome harnesses all wires are marked along the length and run around 4-$500 U.S..it would be a good starting point then fine tune with WIKI info,
also several on e-bay right now around the same price.
also several on e-bay right now around the same price.
vundba- Posts : 33
Join date : 2009-06-15
Location : Belvidere Ill.
Re: Convertion d'un francaise
j'ai reçu un MP de greg qui va me permettre d'instaler le week end prochain mon ls6 "thanks greg "
Je travail sur une ferrarie 456 et l'assistance de freinnage est electrique ,quand je finie le gros entretien de cette fiat de sport ,je vous posterer des photos du system
[You must be registered and logged in to see this image.]
a plus jonathan
Je travail sur une ferrarie 456 et l'assistance de freinnage est electrique ,quand je finie le gros entretien de cette fiat de sport ,je vous posterer des photos du system
[You must be registered and logged in to see this image.]
a plus jonathan
Joe- Posts : 62
Join date : 2009-08-30
Age : 43
Location : French from paris
Re: Convertion d'un francaise
WOW
I'm impressed, on most forums that would've turned into an endless flame war. One more reason this is my favorite forum I've found to date!
Thanks Greg and everyone!
Car looks great, Joe! An LS6! I really wanted to get one, but I didn't have enough money.
I'm impressed, on most forums that would've turned into an endless flame war. One more reason this is my favorite forum I've found to date!
Thanks Greg and everyone!
Car looks great, Joe! An LS6! I really wanted to get one, but I didn't have enough money.
Luke714- Posts : 441
Join date : 2009-12-30
Age : 33
Location : Maine
Re: Convertion d'un francaise
me too, the only one 948 Porsche forum, lol!!! that I attend
Greg please, my UPS number,I sent you a MP but maybe you don't read it yet.
I'm patient it's my large defect!!
I count on you
thanks joe
Joe- Posts : 62
Join date : 2009-08-30
Age : 43
Location : French from paris
Re: Convertion d'un francaise
PM / Tracking Number sent.
gt1scca- Posts : 795
Join date : 2009-06-08
Age : 55
Location : Belton, SC
Re: Convertion d'un francaise
ok
thanks
thanks
Joe- Posts : 62
Join date : 2009-08-30
Age : 43
Location : French from paris
Re: Convertion d'un francaise
Hello for the brake, I seen an assistance cardonne, good or not good
thank you Joe
[You must be registered and logged in to see this image.]
[You must be registered and logged in to see this link.]
thank you Joe
[You must be registered and logged in to see this image.]
[You must be registered and logged in to see this link.]
Joe- Posts : 62
Join date : 2009-08-30
Age : 43
Location : French from paris
Page 3 of 4 • 1, 2, 3, 4
Page 3 of 4
Permissions in this forum:
You cannot reply to topics in this forum
Today at 11:30 am by Gutterboy
» Honda k24 swap
Yesterday at 6:12 am by Colibri Green
» power steering pump
Tue Mar 26, 2024 3:29 pm by Blaizefed
» FRESH BUILD - after a few miles became hard to get into gear
Tue Mar 26, 2024 1:30 pm by Raymond-P
» VATS Bypass/Delete
Tue Mar 26, 2024 8:49 am by 948
» Ray's 1987 944 LS1 Build & Swap
Wed Mar 20, 2024 11:52 pm by Raymond-P
» Purpose of the speed sensor with a stock ECU
Wed Mar 20, 2024 1:17 pm by Rob44
» FS: Porsche 928 968 944 S2 951 Turbo FRONT BREMBO CALIPERS
Tue Mar 12, 2024 3:22 pm by dcoutofstep
» 944 S2/Turbo J LTD Edition Front Lip Spoiler - Brand New never fitted
Tue Mar 12, 2024 2:10 pm by dcoutofstep
» Adding Purge Solenoid Wiring to Standalone Harness
Tue Mar 12, 2024 12:12 pm by ndog52