HOW TO DO AN ADVANCED SEARCH.
Mon Jul 08, 2013 3:56 pm by Admin
For the benefit of 944Hybrids users there are two search functions available for you to use.
The purpose of this sticky is to explain the "Advanced Search" function because it is much more powerful and is the best choice when researching information.
When you log on to the site a list of options is shown in a line at the top of the page. One option is labelled "Search", use this option (NOT the search box lower down on the right).
After you click on the upper search option, a drop down box appears. At the bottom of this box is a radio button marked "Advanced …
Comments: 0
Similar topics
Latest topics
Log in
928 MC size(s)
2 posters
944Hybrids: 924/944/968 and 928 V8 Conversions :: 928 Conversions :: 928 LTX / LSX / SBC Conversions
Page 1 of 1
928 MC size(s)
Anybody have this info. I'm building a Big Brake kit mocking up adapters for the Wilwood Superlites and 330mm rotors.
xschop- Posts : 2711
Join date : 2009-06-09
Location : OKC
Re: 928 MC size(s)
The front circuit is a 23.81mm piston and the rear is 20.64mm.
948- Moderator
- Posts : 573
Join date : 2009-06-09
Age : 108
Location : East PA
Re: 928 MC size(s)
Thanks 948. What piston size (4-pot) would you recommend to go with putting on the 330mm rotors while leaving the rears stock? The 928 weighs about 400lbs more than a 948 lS1 (3300lb)
xschop- Posts : 2711
Join date : 2009-06-09
Location : OKC
Similar topics
» master cylinder brake lines
» Scryfst '88 LS1, thought I'd share some updated pics
» M/C thread size
» Scryfst '88 LS1, thought I'd share some updated pics
» M/C thread size
944Hybrids: 924/944/968 and 928 V8 Conversions :: 928 Conversions :: 928 LTX / LSX / SBC Conversions
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
Yesterday at 6:12 am by Colibri Green
» NDog52's 1986 NA 5.3 Build
Tue Mar 26, 2024 6:28 pm by Raymond-P
» power steering pump
Tue Mar 26, 2024 3:29 pm by Blaizefed
» FRESH BUILD - after a few miles became hard to get into gear
Tue Mar 26, 2024 1:30 pm by Raymond-P
» VATS Bypass/Delete
Tue Mar 26, 2024 8:49 am by 948
» Ray's 1987 944 LS1 Build & Swap
Wed Mar 20, 2024 11:52 pm by Raymond-P
» Purpose of the speed sensor with a stock ECU
Wed Mar 20, 2024 1:17 pm by Rob44
» FS: Porsche 928 968 944 S2 951 Turbo FRONT BREMBO CALIPERS
Tue Mar 12, 2024 3:22 pm by dcoutofstep
» 944 S2/Turbo J LTD Edition Front Lip Spoiler - Brand New never fitted
Tue Mar 12, 2024 2:10 pm by dcoutofstep
» Adding Purge Solenoid Wiring to Standalone Harness
Tue Mar 12, 2024 12:12 pm by ndog52