Home944hybrids Forum
Wed Jul 22, 2009 11:30 am by gt1scca
.
Welcome to the 944hybrids Forum, home of the 924 / 944 / 968 / 928 V8 Conversions.
Browse the site or register if you like.
Welcome to the 944hybrids Forum, home of the 924 / 944 / 968 / 928 V8 Conversions.
Browse the site or register if you like.
Comments: 0
Latest topics
Log in
Trans mount dims
944Hybrids: 924/944/968 and 928 V8 Conversions :: Technical Stuff (other than motors) :: General Mechanical
Page 2 of 2 • Share •
Page 2 of 2 • 
1, 2
Re: Trans mount dims
v8carreragts on Sun Nov 01, 2009 2:09 am
The 3M Fast Window Weld works great. I've heard that the other stuff doesn't dry very well when it is too thick. I've used it many times and it works great. Cheap too.
v8carreragts- Posts: 58
Guru Status: 4
Join date: 2009-06-09
Age: 52
Location: Wheaton, IL
Re: Trans mount dims
Porch on Tue Nov 03, 2009 12:32 pm
If by "other stuff" you mean the polyurethane...it dried completely in 24 hours.
Porch- Posts: 67
Guru Status: 2
Join date: 2009-09-03
Re: Trans mount dims
v8carreragts on Tue Nov 03, 2009 7:48 pm
I meant the non "fast" 3M Window Weld. Some people have told me that it takes forever for the mount to completely cure inside. I have only used the fast type.
v8carreragts- Posts: 58
Guru Status: 4
Join date: 2009-06-09
Age: 52
Location: Wheaton, IL
Re: Trans mount dims
Porch on Wed Nov 04, 2009 10:19 am
Good to know! I probably would have gone that route if i were still looking...that stuff is a little easier to get ahold of than a DIY polyurethane kit!
Porch- Posts: 67
Guru Status: 2
Join date: 2009-09-03
Page 2 of 2 • 1, 2
Permissions of this forum:
You cannot reply to topics in this forum
» Late Spindles on Early Struts
» LS3 Harness pin outs
» Conversion Parts For Sale
» LSx hood clearances
» Expuppy told me of you guys, I need help.
» workshop/garage space for rent in DC area.
» Drivers seat and Tall People
» Hybrid Crests / Part D'eux...
» power steering pump