For Sale & Wanted (Vendors Limited...)

Conversion Parts For Sale

billy25us — Tue, 24 Nov 2009 01:36:05 GMT

I have an adapter plate,c5 bellhousing,pilot bearing adapter,and motor mount uprights for sale. Bought from xchop but since have changed directions on project. Email as I do not check site much. billygunn25us@hotmail.com

workshop/garage space for rent in DC area.

buzz — Mon, 23 Nov 2009 13:22:51 GMT

i was not sure were to post this, but here sounded good to me. I rent 2 car garage and would like a "carmate" for the winter. (6 months) the garage is in Virginia off of 66 near nutley st. I would still keep my half of the garage and looking to rent the other bay out. My 928/Vette convertion is complete, well its never done but my big construction things are done. Before i post something on craigs list i thought a fellow hybrids member would make a good tenant. quick ...

Hybrid Crests / Part D'eux...

gt1scca — Mon, 14 Sep 2009 06:06:59 GMT

I have been asked several times lately about the Hybrid Crests. These were produced in July / August 2008 in limited production, 15 total. The last Crest sold in May '09. I will have a second run of the Crests done if the minimum order of 10 is met. This means prepaid in full, 4-6 weeks production time, 5-10 days shipping. Serious inquiries only! I will PM details to interested members. I cannot financially sponsor this production run, therefore a full deposit will be required, and the minimum ...

Single Master Cylinder Conversion kit

xschop — Sat, 07 Nov 2009 02:29:40 GMT

I need a show of hands who wants a set of the Single MC pushrod swap just like you see in the 944 V8 swap manual .......PM me for price. I promise it will make RH cry....
http://s94.photobucket.com/albums/l96/xschop/?action=view¤t=Image005-5.jpg

951 LSD Transmission

968ls1 — Fri, 20 Nov 2009 21:57:20 GMT

951 LSD transmission 102K 9U code w/o external oil cooler. (tall 5th .729 available if you want lower cruising RPM). $***.00, Tall 5th $***, Trans with tall 5th installed $****.00. plus freight.
Send Pm Please if interested

Front and rear Euro Bumpers

Admin — Tue, 03 Nov 2009 21:34:21 GMT

I have front and rear Euro bumper covers. They are made from 3 hand laid layers of fiber glass. I call them covers because they are not sturdy enough to be considered bumpers, to be bumpers you will need to reinforce them with some steel backing. The rear has a small angle of fiber glass to attach it to your car with, the front I do not have any mounting set up yet. Shouldn't be to hard to fab something though. I can make these really light (about 6lbs) for the racers out there. PM me for pricing. ...

NEW 944 / LSX Conversion Parts Site...

gt1scca — Tue, 10 Nov 2009 06:18:00 GMT

The name is simple. The parts are proven. RH has a new headache... 944V8S.com The LSX parts haven't had a dedicated site other than RH, until now. I'll keep it running until the LAST 944 is converted... Doug was right... Someone made a bad decision.

donor car fs

modenas — Mon, 09 Nov 2009 04:09:55 GMT

if i bought a 944 and took the few things i needed off of it could i sell it to anyone on here? it be a running car and no problems, all i take it the rims and trade with dial phone. it runs and perfect body.

Cryo-treated 85.5 Hubs/Spindles for Boxster/Lexus swap

xschop — Sun, 08 Nov 2009 16:50:20 GMT

Selling because I changed to Late offset hubs to run Tubo Twist 18’s without 1” spacers. Early offset (85.5- NOT HOLLOW) Spindles and Hubs…… Spindles and hubs have been Cryo-treated, then hubs machined on outer edge to accept and center 318mm Boxster S rotors. Included are the Lexus LS430 4-pot (4x42) caliper adapters that fit over the Boxster S rotors with new hardware. They have new inner and outer bearings installed and preload set at locknut ...

LSX Conversion - Clutch Kit Group Buy

robstah — Tue, 15 Sep 2009 20:53:09 GMT

Hey guys. As mentioned in another thread, I was able to swing a deal with Gripforce clutches for an overall clutch kit for our conversions. Here is what is included: LSx Flywheel LSx Pressure Plate 11 3/4" Clutch Disk, with correct Porsche 944 splines I am going to need 5 or more to get the group buy discount, so let's start a list right here. If you are interested, I can PM you the price of the setup. 1. Robstah 2. endrnet

Ready to buy conversion parts - need vendor help

Bluemach1 — Fri, 30 Oct 2009 21:19:16 GMT

Well, I finally got the 951 to pass california emissions and completed the registration into my name! That means that I can begin phase two, the actual LS1 transplant! So I am a bit confused about who has what for sell on this board. 1) 944hybrids has the uprights and bearings (are these xschops uprights?) 2) xschop has the bellhousing to TT adapter 3) has anyone prefab'ed wiring harness for the LS1 yet or is this a make your own still? 4) Who has the mounting block plates? ...

Good V8 Conversion Candidate. (Not Mine)

Dawgz83948 — Tue, 27 Oct 2009 22:51:22 GMT

http://www.944online.com/cgi-bin/forum/forum.cgi?board=944ForSale;action=display;num=1256683348

Nice looking car.

1986 Porsche 944 Conversion Near completion for sale

bwb — Tue, 27 Oct 2009 20:28:51 GMT

1986 Porsche 944 Conversion to a Chevy Small Block V8 near completion. Have too many projects to complete, with no time to finish this project. gain Renegade Hybrids small block conversion kit with the following upgrades: Pressure plate Flywheel Radiator assembly Cooling and oil pressure sending units High torque lightweight starter Heavy duty front springs Following has been completed so far on the conversion: Engine rebuilt and installed. Fuel regulator installed ...

H&R 43mm DRM Wheel Spacers

Bluemach1 — Mon, 26 Oct 2009 15:35:39 GMT

P/N 8695716
PM for prices!
$*** includes domestic USPS shipping.

Thanks,
Ted

Small Block Chevy FS

modenas — Fri, 02 Oct 2009 19:54:01 GMT

SBC for sale, 327 with power pack head, performance intake, mild cam, starter, motor mount, chrome valve covers, long or short water pump (your choice), high performance pressure plate,( made to be raced with IMCA racing modified 10.5, 10.5 clutch with 23 spline, 10.5 flywheel, 65000 volts distributor with top cap, first custom oil pan that is leak free and the engine is painted black. the engine has been rebuilt and well maintained. im selling because i got an offer to have an ls1 at a cheap ...

Wish i had the cash

Ender751 — Wed, 14 Oct 2009 20:43:49 GMT

Hey guys, I've been checking ebay every few days and this one stood out today. <$4k for a 55,000 mile motor and transmission. Seems like a good deal, esp with free shipping. hope somebody gets this, I wish i had the cash. What do you guys think? good deal? no? http://cgi.ebay.com/ebaymotors/2002-Trans-Am-LS1-5-7-Motor-Engine-Automatic-55k_W0QQcmdZViewItemQQhashZitem56361d90b5QQitemZ370275094709QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Head light conversion buckets

Admin — Mon, 10 Aug 2009 02:10:33 GMT

I have the final head light buckets made and ready to sell. Check out the web site for more info.
www.944hybrids.com

993 TT Brembo Brakes with rear 951 Brembo

ghostcloak — Sat, 10 Oct 2009 01:31:13 GMT

Front brakes are 993 Turbo rotors and 4 piston Brembo calipers. The rears are 951 rotors and 4 piston Brembo calipers. Both front rotors measure 322mm x 31mm. Both rear rotors measure 299mm x 24mm. Adapters, hubs, and rotor hats are included to accommodate '87-'95 944/951/968 Porsches. The rear pads are almost new, however, the front pads should be replaced. Overall good condition with some minor cosmetic blemishes on the calipers. The front passenger caliper has some clear coat peeling, as ...

944S Transaxle (transmission) For Sale

968gene — Sun, 06 Sep 2009 02:46:35 GMT

80-90,000 miles. No issues. $600 plus shipping. stronger than a NA transmission. same gears and bearing etc. as the Turbo trans but with NA final drive ratio. email gmccarty@carolina.rr.com for pics.
Thanks.

Cops ebay!

944-LT1 — Tue, 22 Sep 2009 19:26:57 GMT

Any of you heard of propertyroom.com? Its a place where police sell stuff thats been recovered but not claimed.

Pretty cheap stuff. http://www.propertyroom.com/

LS1 Intake and ported throttle body

968gene — Mon, 21 Sep 2009 01:25:34 GMT

I decided to go with the LS6 intake instead. Need to sell these cheap! The intake has been painted and the TB does not have a TPS.
I also have the correct injectors if interested.
Gene

Selling top end package for LT1

ffmedic — Sat, 19 Sep 2009 00:13:24 GMT

I will be selling a complete top end package for a LT1. What I am selling is this: 1 competition cams cam part number 07-500-08 gross valve lift .480 .488 duration .060 tappet lift 258 264 with lobe separation 112. 2 aluminum Lt1 heads that have been ported looks to be ported to match the gaskets ,should be an increase in hp due to what has been done to them.( 1.94 intake exhaust 1.55 on the valves) 16 or a full set of rocker arms competition cams part number 1418-16 (1.6 rockers self ...

Good used V1 bumpsteer kit

xschop — Wed, 16 Sep 2009 12:49:58 GMT

Perfectly good used Version-1 Bumpsteer kit that uses CNC Billet Top-hats between body tower and your struts. The x-member spacers also drop it a full 1". These are all machined 1" thick. I only installed them for mockup reasons before I developed the 1" drop control arm mod. Just run a bead of RTV and bolt them right up....
PM me for a price...

LS Conversions, I think we have a solution!!!

ernestj911@gmail.com — Tue, 14 Jul 2009 20:58:45 GMT

Hello Everyone, I just wanted to let everyone know that I work with Mike As many of you know, he is the originator of the LS conversion for 944s and 968s. Well, we want to help, misc parts - we got them, complete kits - got that also, headers (ones that work) - no problem. Email me with needs and Mike and I will assist in anyway possible. We have proven parts, proven kits (23 complete cars). Solutions for power steering, power brakes, gauges that work properly, transmissions work, shift and ...

WTB Side skirts

msmoorenburg — Fri, 12 Jun 2009 13:52:35 GMT

Anyone have a pair they want to sell?

Motor Mounts

xschop — Fri, 14 Aug 2009 22:03:31 GMT

Got a few sets of the motor mounts done and making more. DOM steel is used with 1.0” I.D. and 1.5” O.D. with solid ¼” wall design. The upper perches are 1.O” machined with 0.5” isolator bolt-thru holes and chamfered for precision fit and strength. The base plate is machined from 3” solid steel round and finishes at ¼” thick also. The uprights are Ball-milled on the CNC for the upper perch insets and the lower portion is then set up on a Bridgeport mill using angle gauges to get ...

LS1 pilot bearing adapters

Admin — Sat, 05 Sep 2009 01:43:23 GMT

I now have LS1 pilot bearing adapters available.

www.944hybrids.com

LT1 motor mounts

Admin — Tue, 25 Aug 2009 21:02:06 GMT

We now have motor mounts for the LT1 swap.
www.944hybrids.com/GM-SBC-LTX-LSX-PARTS.html

LT1 pilot bearing adapters

Admin — Tue, 25 Aug 2009 21:04:47 GMT

We now have LT1 pilot bearing adapters available.
www.944hybrids.com/GM-SBC-LTX-LSX-PARTS.html

Fiberwerks Body Kit

DainBramaged — Sat, 22 Aug 2009 02:28:08 GMT

I purchased this with the intention of installing but never got around to it. Brand new, never primed, painted or installed. This is the front bumber and rockers. First $500.00 takes them, thats almost a 50% savings.
http://www.fiberwerks.com/Fiberwerks_944.htm

1987 944 N/A...Parts

gt1scca — Fri, 21 Aug 2009 06:22:42 GMT

I am parting out an '87 N/A. This car has full suspension, torque tube [minus transaxle], and a set of 928 wheels. I am tired of looking @ this beast, so if no sale, it will be flattened, and misc. parts will be available @ a later date. I'd be content with selling the wheels and suspension...the body is crap... [ just being brutally honest...]. Body is rough, dash is cracked, but there are a few good parts left: [4] 928 wheels [16 X 8] Working sunroof Misc. ...

17" Twists

968gene — Fri, 21 Aug 2009 13:29:23 GMT

I have a set of four 7x17" ET 55 Twists from a 996. They will work on all four corners on a late offset car. Cheap!

RH Conversion Parts

944-LT1 — Tue, 18 Aug 2009 06:50:57 GMT

On Ebay now if interested. http://cgi.ebay.com/ebaymotors/Porsche-944-V8-Conversion-Bellhousing-and-Mount-951-968_W0QQcmdZViewItemQQ_trksidZp3286Q2ec0Q2em14QQhashZitem3ca4e4f9f8QQitemZ260464507384QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

87 Parts Car.

Dawgz83948 — Wed, 12 Aug 2009 20:34:43 GMT

Hey guys I'm going to have access to an 87 944 Parts car. I'm taking the rear suspension anyone else need parts? If so what so I can remove them and put a name on them. I'm getting the car for cheap so the parts will not be too $$$.

Attention anyone from Atlanta area

spence — Fri, 14 Aug 2009 18:32:39 GMT

Found this today while doing some searching... Great price

http://atlanta.craigslist.org/nat/cto/1320258186.html

C5 Bellhousing Adapter Plates and Pilot Bearing Adapter Combo

xschop — Fri, 07 Aug 2009 23:28:39 GMT

Got a run of the C5 Bellhousing adapter plates and bushings done and am doing a "PORH" special. PM me for details....I will be working on motor mounts and will have enough ready in 2 weeks..... PORH Fully Assembled plate with set screws, nuts, lockwashers and guide-pins installed and pilot bearing of your choice of LT/SBC or LS/4.8/5.3/6.0/6.2 liter engines Install your trimmed C5 throwout bearing or aftermarket T.O. bearing if you choose.... Special ...

WTB C5 Manual Bellhousing

944-LT1 — Fri, 07 Aug 2009 04:39:39 GMT

Hey guys.

Cant seem to find a bellhousing. Let me know if you have one (2-piece) or know where one is.
Thanks!

Late Struts

xschop — Wed, 22 Jul 2009 15:38:42 GMT

Looking for a set of late struts to do some experimenting on. Fried dampers no problem.

FS-My LS1 944 turbo is on ebay

craighardy — Sun, 26 Jul 2009 02:46:26 GMT

I bought another Porsche hybrid project.

http://www.hybrid9s.com/showthread.php?t=75

My 944 must go to make room.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=290334278869

Craig

85 project FS

jhelgesen — Fri, 10 Jul 2009 00:27:11 GMT

...

NO PRICE POSTING PLEASE!

Admin — Mon, 20 Jul 2009 18:14:03 GMT

Please do not put any prices in your ads, If someone is interested they will contact you.
Thanks
Admin

Have Parts and want parts

968gene — Wed, 08 Jul 2009 03:04:00 GMT

I have a pair of 944S spindles and hubs, a pair of late 951 (not M030) calipers, spindles and hubs, as well as some Club Sport wheels. I also have some misc. interior dash plastic. I am looking for LS1/5.3L conversion parts. Thanks, Gene

Set of Big Reds

968gene — Fri, 03 Jul 2009 02:08:21 GMT

Now on Pelican Parts under 911 section...great deal! No affiliation. Gene

16" wheels for sale/trade

968gene — Fri, 03 Jul 2009 01:52:56 GMT

I'm selling these (posted everywhere) to move to 17's. I've got D90's as well as Club Sports. 8's and 9's. I am looking for conversion part trades or cash. Let me know what you have. Thanks, Gene